Bedienungsanleitung Zvox SoundBase 350 (Seite 1 von 2) (Englisch)

792481

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

MUTE VOLUME INPUT

Volume

The VOLUME buttons on the SoundBase remote control operate in

the normal manner.

Power (STANDBY)

The Power button on the SoundBase remote control toggles the

SoundBase between STANDBY and On. Note: You can choose to

engage the AutoStandby feature from the PS menu if you want the

SoundBase to automatically go into Standby after approximately 7

minutes of silence.

A SoundBase in STANDBY will automatically turn back on if it senses

a volume adjustment or power command from the “learned” remote

control or the SoundBase remote control.

Mute

The MUTE button on the SoundBase remote control operates in

the normal manner. When MUTE is active, the display will show a

blinking -00- for 20 seconds.

Bass and Treble

The Bass control has a range of -4 to 4.

The Treble control has a range of -4 to 4.

Note: The bass output of a SoundBase system is affected by its

position within a room. You may nd it sounds best with slightly more or

less bass than the neutral setting.

Surround Settings

There are three SURROUND levels:

• Surround One (“Sd 1”) has low virtual surround effect and strong

vocals. Use this setting if vocal clarity is important to you.

• Surround Two (“Sd 2”) has moderate virtual surround effect

and moderate vocals. Most people prefer this setting for most

program material.

• Surround Three (“Sd 3”) has strong virtual surround effect

and moderate vocals. Many people prefer this setting when

watching movies.

Remote Control Capabilities

Output Leveling

Press this button to prevent large changes in volume. When engaged,

it boosts quiet dialog and lowers the output of loud commercial breaks.

It also reduces volume swings between cable or satellite channels. This

feature can be used along with any of the three Surround settings.

Accuvoice

Press this button to increase the clarity of most voices.

Pressing Accuvoice overrides the current Surround setting. A second

press returns the SoundBase to the last-used Surround setting.

STILL NEED ASSISTANCE? If your home TV system does not conform to the

descriptions in this guide, don’t hesitate to send an inquiry to info@zvoxaudio.com

or call ZVOX Audio at (866) 367-9869. Please provide your TV brand and model

number. A ZVOX Audio representative should be available (Eastern Time Zone)

Monday through Friday 9:30 AM to 7:30 PM and noon to 4:00 PM on Saturday.

4b. SoundBase Front Panel and Rear Panel

4a. Infrared Remote Control Features

of the SoundBase

Learning:

You can “teach” the SoundBase to respond to your cur-

rent TV remote control for the following functions: Vol-

ume, Mute (on/off) and Power (on/off). See the separate

sheet for instructions. After this “learning” process, you

will not need the SoundBase remote control for adjust-

ing Volume, Mute and Power. Teaching the SoundBase

to respond to your preferred remote does not affect the

included SoundBase remote. The SoundBase remote

will still provide its full range of adjustments.

Input Selection:

Pressing the INPUT button allows you to select

a different input. Inputs are selected in the

following order:

Input 1—digital (optical or coaxial jack)

Input 2—analog (input 2)

Input 3—analog (input 3)

Bluetooth device

Bass set at -2

Treble set at 1

Mute

MUTE VOLUME INPUT

® ZVOX and SoundBase are registered trademarks and AccuVoice is a trademark of ZVOX Audio, LLC.

® Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. used under license by ZVOX Audio LLC.

Setup & Operation

ZVOX SoundBase

®450/350

Don’t Worry It’s Pretty Easy.

What’s in the box

SoundBase system • Remote control • Instruction sheets

AC power cord • Optical digital and Analog signal cables

(866) 367-9869 | info@zvoxaudio.com

Place the system on furniture.

STEP 1

STEP 2

STEP 3

Connect one signal cable.

Connect the power cable.

Home Theater

Made Simple!

SoundBase Front Panel Controls and Input

SoundBase Back Panel Inputs and Outputs

1 MUTE/Power button. If the system is on, a press of this button toggles MUTE on and

off. Also while the system is on, if you press and hold the MUTE button for longer than

four seconds, the system will enter STANDBY.

2 VOLUME -/+. The volume range indication is 01 to 30.

3 INPUT. Selects between the four input choices on a SoundBase. See 4a Input in rst

column.

5. Digital Audio Troubleshooting

TV sets with no audio output:

You should check the program sources connected to the TV for an audio output (cable box, disc

player, game box). Many cable boxes and DVD/Blu-ray players have both analog and digital audio

outputs. If you connect directly to a set top box and a DVD/Bluray player, you need to switch

inputs on the TV and the SoundBase.

Bluray disc audio:

If you don’t get sound from a Bluray disc, the digital audio on that disc may be encoded using

a proprietary format. In this case, use the Bluray disc menu or the Bluray player menu to select

Dolby Digital or PCM digital output.

Internet streaming HD video audio:

If your TV features a internet connection and displays HD streaming content, it may be

necessary to select Dolby Digital or PCM digital audio in the TV or from the streaming provider’s

sound options.

1 32

Zvox SoundBase 350 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zvox SoundBase 350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info