Bedienungsanleitung ZyXEL Gateway 400 (Seite 62 von 68) (Englisch)

796886

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Gateway 400 User Guide | Glossary

NAT (Network Address Translation) NAT is a procedure used in the in Gateway 400

to connect the local network to the Internet. Only one public IP address is usu-

ally available for the Internet, whereas on the local network, by contrast, each

station has its own private IP address. These private addresses have no valid-

ity in public networks. In order to provide all the computers with private IP ad-

dresses access to the Internet, the Gateway 400 replaces the IP addresses of

the connected computers in all outgoing data packets with its own public IP

address. To enable the incoming data packets to be assigned to the correct

destination, the Gateway 400 the stored the current connections in a table.

Network The term network refers to a group multiple computers and other peripheral

devices connected together to share information. The interconnected com-

puters usually have shared access to the individual hardware components

(such as mass storage devices) on the network.In addition, consumer elec-

tronics devices such as TVs, set-top boxes, etc., can be controlled via networks.

A home network may be configured as a wired and/or wireless network,

where a wide range of different technologies such as Wi-Fi, USB or wired

Ethernet work together.

Offline Offline identifies an inactive connection.

Online Online identifies an active connection.

Password protection,

configuration

You can change the password for the user interface of the Gateway 400 in the

System/Password menu. Make sure that you always do this after you first

connect the Gateway 400 in order to prevent unauthorized access to the

Gateway 400. If you have forgotten your password, you can revert to the fac-

tory default settings of the user interface only by resetting the Gateway 400.

All custom settings will be lost in the process. To reset the Gateway 400, press

the Reset button for about 10 seconds (until the Power LED lights up in red

for the second time).

Phone switch Switching device for connecting multiple devices (such as telephones, fax

equipment, answering machines, etc.).

Port The term port designates a connection or an interface. A distinction is made

between a physical port (e.g., a USB port for a mass storage device) and a log-

ical port (such as port 80 for the Internet connection).

Port Forwarding Port forwarding enables computers within a local network to also operate

outside that network and thus be accessible to other external computers as

well. This is important, for example, to exchange data over the Internet or to

communicate with other computers while playing games over the network.

PPPoE Pass Through PPPoE (Point-to-Point-Protocol over Ethernet) Pass Through enables the rout-

er to be operated in transparent mode and an additional Internet connection

to be set up from the local network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL Gateway 400 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ZyXEL Gateway 400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info