730080
17
Zoom out
Zoom in
Vorherige Seite
1/202
Nächste Seite
Chapter 1 Introduction
LTE3302-M432 & LTE3312-M432 User’s Guide
17
1.3.3 Rear Panel
The following graphics displays the rear panels of the LTE Device.
Internet
Green On The LTE Device’s 4G connection is ready but no new SMS text
messages.
Blinking
(slow)
The LTE Device’s 4G connection is not ready and there is no new
SMS text messages.
Blinking
(fast)
The LTE Device’s 4G connection is ready and there is a new SMS
text message.
Amber On The LTE Device’s 3G/2G connection is ready but no new SMS text
messages.
Blinking
(slow)
The LTE Device’s 3G/2G connection is not ready and there is no
new SMS text messages.
Blinking
(fast)
The LTE Device’s 3G/2G connection is ready and there is a new
SMS text message.
Off The WAN connection is not ready, or has failed, and there is no
new SMS text messages.
WLAN/WPS
Green On The LTE Device is ready and the 2.4GHz wireless LAN is on, but is not
sending/receiving data through the wireless LAN.
Blinking
(slow)
The LTE Device is ready and WPS is on.
Blinking
(fast)
The LTE Device is sending/receiving data through the wireless LAN.
Off The wireless LAN is not ready or has failed or WPS is disabled.
LAN
Green On The LTE Device’s LAN connection is ready.
Blinking The LTE Device is sending/receiving data through the LAN.
Off The LAN connection is not ready, or has failed.
Battery
Green On A battery is installed in the LTE Device, and it’s fully charged.
Note: Remove the battery or disconnect the power cable
when the battery is fully charged.
Amber Blinking A battery is installed in the LTE Device, and it’s charging.
Green &
Amber
Alternating The Battery LED will alternate between green and amber in the
following situations:
A wrong type of battery is being used, or the battery is
damaged (correct type of battery: lithium-ion battery).
The battery was removed while charging.
The battery temperature is too high or too low.
Note: The recommended ambient temperature range for
an operating environment is 0°C to 40°C (32°F to
104°F).
Off No battery is installed in the LTE Device, or the power cable is not
connected to the LTE3302-M432 to charge the battery installed in
the LTE3302-M432.
Table 1 Front Panel LEDs (continued)
LED COLOR STATUS DESCRIPTION
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZyXEL LTE3312-M432 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ZyXEL LTE3312-M432

ZyXEL LTE3312-M432 Kurzanleitung - Alle Sprachen - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info