730079
32
Zoom out
Zoom in
Vorherige Seite
1/191
Nächste Seite
LTE3316-M604 User’s Guide
32
CHAPTER 4
Tutorials
4.1 Overview
This chapter provides tutorials for setting up your LTE.
Connecting to the LTE Using WPS
Connect to LTE Wireless Network Without WPS
Using Multiple SSIDs on the LTE
4.2 Connecting to the LTE Using WPS
This section gives you an example of how to set up a wireless network using WPS. This example uses the
LTE as the AP and a WPS-enabled Android 4.4.2 smartphone as the wireless client.
There are two WPS methods for creating a secure connection via the Web Configurator or utility. This
tutorial shows you how to do both.
Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See
Section 4.2.1 on page 32. This is the easier method.
PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal
Identification Number) in the LTE’s interface. See Section 4.2.2 on page 33. This is the more secure
method, since one device can authenticate the other.
4.2.1 Push Button Configuration (PBC)
1 Make sure that your LTE is turned on and that it’s within range of your computer.
2 WPS is disabled by default on the LTE. log into LTE’s Web Configurator and turn it on in the Configuration
> Network > Wireless LAN > WPS Station screen. You can either press the WPS button on the LTE’s panel or
press the Push Button in the Configuration > Network > Wireless LAN > WPS Station screen.
Note: It doesn’t matter which button is pressed first. You must press the second button within
two minutes of pressing the first one.
The LTE sends the proper configuration settings to the wireless client. This may take up to two minutes.
Then the wireless client is able to communicate with the LTE securely.
The following figure shows you an example of how to set up a wireless network and its security by
pressing a button on both LTE and wireless client (the Android 4.4.2 phone in this example).
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZyXEL LTE3316-M604 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ZyXEL LTE3316-M604

ZyXEL LTE3316-M604 Kurzanleitung - Alle Sprachen - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info