Bedienungsanleitung ZyXEL LTE3316-M604 (Seite 59 von 191) (Englisch)

730079

Zoom out

Zoom in

Vorherige Seite

1/191

Nächste Seite

Chapter 7 WAN

LTE3316-M604 User’s Guide

WAN Gateway Enter the gateway IP address.

Primary DNS Enter the first DNS server address assigned by the service provider.

Secondary DNS Enter the second DNS server address assigned by the service provider.

PPoE WAN Type Configuration

These fields appears when you select PPPoE in the WAN Type field.

PPPoE Account Type the user name or account given by your ISP.

PPPoE Password Type the password associated to this account.

Primary DNS Enter the first DNS server address assigned by the service provider.

Secondary DNS Enter the second DNS server address assigned by the service provider.

Service Name Type the PPPoE Service Name from your ISP provider. PPPoE uses a service name to

identify and reach the PPPoE server.

Assigned IP Address Enter the IP address assigned by your ISP.

MTU Enter the MTU (Maximum Transmission Unit) of each data packet, in bytes, that can

move through the WAN connection.

Network Monitoring Select this option to have the LTE test the WAN connection by periodically sending

DNS Query to a DNS server or sending a ping (ICMP Checking) to either the default

gateway or the addresses you specify in the Target1 and Target2 fields.

Loading Check Select this option to check how many packets have been transmitted or received

through the WAN connection within a time period specified in the Check Interval

field.

Check Interval Type a number of seconds (0 to 99999) to set the time interval between checks.

Allow more time if your destination IP address handles lots of traffic.

Check Timeout Type the number of seconds (0 to 99999) for your LTE to wait for a response to the

ping or DNS query before considering the check to have failed. This setting must be

less than the Check Interval. Use a higher value in this field if your network is busy or

congested.

Latency Threshold Type a number of milliseconds (0 to 99999) for the latency threshold.

If the specified latency threshold is exceeded, the LTE considers the check to have

failed and makes a new connection after (Latency Threshold * Fail Threshold)

seconds.

Fail Threshold Type how many WAN connection checks can fail (0 to 99999) before the

connection is considered "down" (not connected). The LTE still checks a "down"

connection to detect if it reconnects.

Target1 / Target 2 Select DNS1 to have the LTE send a DNS query to the first DNS server address

assigned by the service provider.

Select DNS2 to have the LTE send a DNS query to the second DNS server address

assigned by the service provider.

Select Gateway to have the LTE ping the WAN interface's default gateway IP

address.

Select Other Host and enter a domain name or IP address of a reliable nearby

computer to have the LTE ping that address.

Table 13 WAN Management Edit Ethernet (continued)

LABEL DESCRIPTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL LTE3316-M604 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ZyXEL LTE3316-M604

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info