Bedienungsanleitung ZyXEL LTE3316-M604 (Seite 66 von 191) (Englisch)

730079

Zoom out

Zoom in

Vorherige Seite

1/191

Nächste Seite

Chapter 8 Wireless LAN

LTE3316-M604 User’s Guide

You can use the MAC address filter to tell the AP which wireless clients are allowed or not allowed to use

the wireless network. If a wireless client is allowed to use the wireless network, it still has to have the

correct settings (SSID, channel, and security). If a wireless client is not allowed to use the wireless

network, it does not matter if it has the correct settings.

This type of security does not protect the information that is sent in the wireless network. Furthermore,

there are ways for unauthorized devices to get the MAC address of an authorized wireless client. Then,

they can use that MAC address to use the wireless network.

User Authentication

You can make every user log in to the wireless network before they can use it. This is called user

authentication. However, every wireless client in the wireless network has to support IEEE 802.1x to do

this.

For wireless networks, there are two typical places to store the user names and passwords for each user.

• In the AP: this feature is called a local user database or a local database.

• In a RADIUS server: this is a server used in businesses more than in homes.

If your AP does not provide a local user database and if you do not have a RADIUS server, you cannot

set up user names and passwords for your users.

Unauthorized devices can still see the information that is sent in the wireless network, even if they cannot

use the wireless network. Furthermore, there are ways for unauthorized wireless users to get a valid user

name and password. Then, they can use that user name and password to use the wireless network.

Local user databases also have an additional limitation that is explained in the next section.

Encryption

Wireless networks can use encryption to protect the information that is sent in the wireless network.

Encryption is like a secret code. If you do not know the secret code, you cannot understand the

message.

The types of encryption you can choose depend on the type of user authentication. (See page 66 for

information about this.)

For example, if the wireless network has a RADIUS server, you can choose WPA/WPA2 or WPA2. If users do

not log in to the wireless network, you can choose None, WPA-PSK, or WPA-PSK/WPA2-PSK.

Usually, you should set up the strongest encryption that every wireless client in the wireless network

supports. For example, suppose the AP does not have a local user database, and you do not have a

RADIUS server. Therefore, there is no user authentication. Suppose the wireless network has two wireless

Table 17 Types of Encryption for Each Type of Authentication

NO AUTHENTICATION RADIUS SERVER

Weakest No Security WPA

WPA-PSK

Strongest WPA2-PSK WPA2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL LTE3316-M604 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ZyXEL LTE3316-M604

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info