Bedienungsanleitung ZyXEL NAS520 (Seite 40 von 364) (Englisch)

607204

Zoom out

Zoom in

Vorherige Seite

1/364

Nächste Seite

Chapter 4 Web Configurator Basics

Cloud Storage User’s Guide

Remove Hot Spare Select a RAID 1 or RAID 5 volume and click Remove Hot Spare to remove the standby

drive from the RAID array.

Status This field shows whether the volume is normal, degraded, crashed, Creating, Deleting,

Expanding, Repairing or Changing the RAID type.

Normal: A green circle represents a healthy volume.

Degraded: An orange circle represents a degraded RAID 1 volume.

Crashed: A red circle represents a down volume.

The following status also displays the percentage of an action has been completed.

Creating: The NAS’s percentage progress in creating the volume.

Deleting: The NAS’s percentage progress in deleting the volume.

Expanding: The NAS’s percentage progress in expanding the volume. For a RAID 1

volume, this also displays the percentage of resynchronizing the NAS has finished and

the evaluated remaining time.

Repairing: The NAS’s percentage progress in repairing the volume. For a RAID 1

volume, this also displays the percentage of resynchronizing the NAS has finished and

the evaluated remaining time.

Changing: The NAS’s percentage progress in changing the volume’s RAID type. For a

RAID 1 volume, this also displays the percentage of resynchronizing the NAS has

finished and the evaluated remaining time.

Volume Name This field shows the name of the volume. Click the column’s heading cell to display an

arrow. Use the arrow to sort the table entries in ascending or descending order.

RAID Type This field shows what type of disk storage technology (Basic, a RAID level or JBOD) a

volume uses.

Available Capacity This field shows the percentage of the volume being used, the percentage that is

available, and the total disk size.

Hot Spare This field shows the name of the standby disk if there is any for a RAID 1 or RAID 5

volume. Otherwise, it shows not supported.

Volume on Disk Group

Use this section to configure and manage volumes built on disk groups.

Create Click this to format internal hard disks and create a new volume on a disk group. All data

on the disks will be lost.

Note: This button is unavailable when a volume or disk group is being created, deleted or

changing the RAID type.

Edit Select a volume and click Edit to expand the volume’s capacity.

Delete Select a volume and click Delete to remove it.

Note: If you delete a volume, all data in the volume disks is erased.

Note: Deleting a volume on a disk group here does not delete the corresponding disk

group. To delete a disk group, click Storage > Disk Group.

Disk Group X This field shows the name of the disk group, the percentage of the disk group size that is

available, the disk group size being used, and the total disk group size.

Table 10 Storage Volume (continued)

LABEL DESCRIPTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL NAS520 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ZyXEL NAS520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info