Bedienungsanleitung ZyXEL NAS520 (Seite 48 von 364) (Englisch)

607204

Zoom out

Zoom in

Vorherige Seite

1/364

Nächste Seite

Chapter 4 Web Configurator Basics

Cloud Storage User’s Guide

The following table describes the labels in this screen.

Table 12 Manage Volume

LABEL DESCRIPTION

Repair RAID Select this to repair a degraded RAID volume.

Expand the

volume by

adding disk(s)

Select this to add one or more disks to a JBOD, RAID 1 or RAID 5 volume. You can add a

disk to increase an array’s capacity or to use as a hot-spare (standby). When you add a

disk to an existing array, you do not have to re-create shares, access rights and so on as

you would if you create a new volume.

Note: This option is available when a disk has not been allocated to any volume or disk group

yet.

Expand the

volume with

unallocated disk

space

Select this to add more storage space to a volume if there is still some space unallocated on

the same disk group. Select this if the NAS fails to expand a volume by adding disk(s) and

the final volume capacity is not as expected. For example, you want to expand a 1 TB RAID

1 volume by adding two more 1 TB disks. The volume size should be 2 TB after expansion,

however, you just see 1 TB. Use this option to fix the issue.

Change RAID

Type

Select this if you want to change the volume’s RAID type from Basic to RAID 1, RAID 1 to

RAID 5, or RAID 5 to RAID 6.

The following describes labels on the following screens after you select Repair RAID in this screen.

Step 1. Select Disks

A This shows the name of the volume you have selected.

Status This field displays the status of the volume.

RAID Type This field displays the type of RAID on which the volume is built.

Disk Info

Status This field displays the status of the disk.

Disk Name This field displays the name of the disk.

Size This field displays the total capacity of the disk.

Model Name This field displays the model of the disk.

Select a disk to

replace the

failed one

This section lists all available hard disks in the table and displays the corresponding disk

tray of the disks you selected on the graphic at the right.

Select one or more hard disks for increasing the volume’s capacity. Use the check box on

the top to select or unselect all entries in this column.

Disk Name This field shows the name of a hard disk.

Size This field shows the total disk size.

Model Name This field shows the model of the hard disk.

Expected

Capacity

This field shows the corresponding space allocations of available size, data protection area,

and wasted size according to your selections on hard disks above.

Note: Use the same capacity of hard disks for RAID 1, 5, 6, or 10 to avoid wasting space.

Back Click Back to go to the previous step.

Next Click Next to go to the next step.

Cancel Click Cancel to close the screen without saving any settings.

Step 2. Summary

Use this screen to review the settings you configured in the last step.

Action This field displays for what the configuration is.

Volume Name This field displays the name of the volume.

Disk Selected This field displays the hard disks you have selected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL NAS520 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ZyXEL NAS520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info