Bedienungsanleitung ZyXEL NAS520 (Seite 331 von 364) (Englisch)

607204

331

Zoom out

Zoom in

Vorherige Seite

1/364

Nächste Seite

Chapter 21 Troubleshooting

Cloud Storage User’s Guide

331

• If you are trying to login directly by typing the server name into your web browser’s address

field, make sure you are using the correct server name as the web site address.

• The default server name is ‘NAS’ followed by the number of your model (‘NAS540’ for

example). If you have changed the server name, use the new one.

• If the server name has been changed and you do not know the new server name, see the

troubleshooting suggestions for I forgot the server name of the NAS.

• If it still doesn’t work, try using the NAS Starter Utility.

• Check the hardware connections, and make sure the LEDs are behaving as expected. See the

Quick Start Guide and Section on page 345.

• By default, the NAS gets an IP address automatically. The NAS assigns itself an IP address if no

device assigns one. If your computer is also set to get an IP address automatically, the computer

and the NAS can both assign themselves IP addresses and communicate. See Section 9.4 on

page 175 if you need to configure the NAS with a static IP address.

• If you are connecting to the NAS by its IP address, make sure you use the correct one. If the NAS

has a wired Ethernet connection and a wireless connection through an attached USB wireless

dongle, the NAS has a different IP address for each connection. To connect through the wired

Ethernet connection, use the wired Ethernet connection’s IP address. To connect through the

wireless connection, use the wireless connection’s IP address.

• Make sure your computer’s IP address is in the same subnet as the NAS’s IP address. You can use

the NAS Starter Utility to find the NAS’s IP address. Skip this if you know that there are routers

between your computer and the NAS.

• Ping the NAS from your computer. Make sure your computer’s Ethernet adapter is installed and

functioning properly. In a (Windows) computer, click Start, (All) Programs, Accessories and

then Command Prompt. In the Command Prompt window, type “ping” followed by the NAS’s

IP address (use the NAS Starter Utility to find the NAS’s IP address if you don’t know it) and then

press [ENTER].

• Make sure you are using Internet Explorer 6.0 (and later) or Firefox 1.07 (and later).

• Make sure your Internet browser does not block pop-up windows and has JavaScript and Java

enabled. With Internet Explorer 6, you may also have to enable scripting of safe ActiveX controls.

See Section 21.4.1 on page 331.

I forgot the password.

• The default password is 1234.

• If you have changed the password and forgotten it, you will have to reset the NAS.

21.4.1 Enabling Scripting of Safe ActiveX Controls

If pages of the web configurator do not display properly in Internet Explorer, check that scripting of

safe ActiveX controls is enabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL NAS520 Seite 331

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ZyXEL NAS520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info