Bedienungsanleitung ZyXEL PLA4201 v2 (Seite 36 von 63) (Englisch)

544188

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Chapter 4 The Configuration Utility

PLA Series User’s Guide

4.5 Advanced Screen

You can configure the powerline adapters on your network to give priority to network traffic

depending on its importance. When you set the priority of a powerline adapter, you set how quickly

messages FROM your powerline adapter are sent in your powerline network. Transmissions TO your

powerline adapter do not receive any priority.

For example, if you have a file server on your home network to deliver music and movie files to

computers in your home, you should set the priority of the powerline adapter connected to this

server to Medium. If video traffic is delivered too slowly, quality problems may occur.

On the other hand, a powerline adapter attached to a printer should have a low priority setting

since the slow delivery of messages will not affect the print job.

Similarly, if you want to prioritize any downloads from the Internet, set the priority on the powerline

adapter attached to your Internet gateway to High.

DAK Password DAK (Device Access Key) password is used to verify that you are authorized to perform

changes on a remote device. You can find the DAK password printed on a sticker on the

bottom of your PLA.

Select the remote powerline adapter you want to manage by clicking the MAC address

which corresponds to it in the MAC Address column. Enter the DAK Password value and

click Save.

Note: You must enter the DAK Password value exactly as it is printed on the label (all caps

and with dashes “-”).

Network Name

(NMK)

The default network name (sometimes called a network password or network membership

key (NMK)) of the PLA is “HomePlugAV”. HomePlug compatible devices use the same

network name to recognize and communicate with each other over the powerline network.

If you change the network name of one device on the network, it will no longer be

recognized as part of that network.

If you change the network name, make sure you change the network name for all of the

powerline adapters that you want to be part of your powerline network.

The network name can be from 8 to 64 characters in length, using “A”~”Z”, “a”~”z”,

“0”~”9”; spaces are not allowed.

Set NMK to this

device

Select this to apply the NMK (entered in the field above) as the network name for the

powerline adapter directly connected to the computer running the configuration utility.

Set NMK to all

devices

Select this to apply the NMK (entered in the field above) as the network name for all

powerline adapter detected by the utility.

Write Click this to apply your changes. The new Network Name is applied to the selected

powerline adapter.

Note: You must enter the correct DAK password for the selected remote powerline adapter

before you can make changes to it.

Table 9 Configuration Screen (continued)

LABEL DESCRIPTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL PLA4201 v2 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ZyXEL PLA4201 v2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info