730110
42
Zoom out
Zoom in
Vorherige Seite
1/82
Nächste Seite
Chapter 7 Wireless LAN
PLA5236 User’s Guide
42
Click Network > Wireless LAN 2.4G or 5G > Advanced. The screen appears as shown.
Figure 24 Network > Wireless LAN 2.4G or 5G > Advanced
The following table describes the labels in this screen.
7.8 Quality of Service (QoS) Screen
The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level.
Click Network > Wireless LAN 2.4G or 5G > QoS. The following screen appears.
Table 18 Network > Wireless LAN 2.4G or 5G > Advanced
LABEL DESCRIPTION
RTS/CTS Threshold Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS (Clear
To Send) handshake.
Note: If you select 802.11n, 802.11gn or 802.11bgn in the Wireless LAN 2.4G or 5G>
General screen, this field is not configurable and the PLA automatically
changes to use the maximum value.
Fragmentation
Threshold
The threshold (number of bytes) for the fragmentation boundary for directed messages. It is the
maximum data fragment size that can be sent.
Note: If you select 802.11n, 802.11gn or 802.11bgn in the Wireless LAN 2.4G or 5G>
General screen, this field is not configurable and the PLA automatically
changes to use the maximum value.
Intra-BSS Traffic A Basic Service Set (BSS) exists when all communications between wireless clients or between a
wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS traffic is enabled,
wireless clients can access the wired network and communicate with each other. When Intra-
BSS traffic is disabled, wireless clients can still access the wired network but cannot
communicate with each other.
Tx Power Set the output power of the PLA in this field. If there is a high density of APs in an area, decrease
the output power of the PLA to reduce interference with other APs. Select one of the following
100%, 90%, 75%, 50%, 25% or 10%.
Apply Click Apply to save your changes back to the PLA.
Cancel Click Cancel to reload the previous configuration for this screen.
42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZyXEL PLA5236 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ZyXEL PLA5236

ZyXEL PLA5236 Kurzanleitung - Alle Sprachen - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info