730110
53
Zoom out
Zoom in
Vorherige Seite
1/82
Nächste Seite
Chapter 9 Home Plug
PLA5236 User’s Guide
53
The information provided in the following table reflects transmission rate information about the powerline adapters
which communicate in your powerline network.
The powerline adapters listed in this table are all the powerline adapters in your powerline network except the
powerline adapter selected in the table of the Network Name section. In other words, if the Local powerline
adapter is selected in the table of the Network Name section, then this table will display the rates of transmission
from the powerline adapter connected to the computer running the Web Configurator to all the Remote powerline
adapters.
Site This field displays:
Local, if it is the PLA directly connected to the computer running the Web Configurator.
Remote, if it is a PLA in your powerline network but not directly connected to the computer
running the Web Configurator.
MAC Address This field displays the MAC address of your powerline adapter. The MAC address of your
powerline adapter can be found by looking at the label on your device. It consists of six pairs of
hexadecimal characters (hexadecimal characters are “0-9” and “a-f”). In the case of the PLA,
this label is on the bottom of the device.
Transmit Rate
(Mbps)
This field displays how fast information is sent from the powerline adapter selected in the table of
the Network Name section to this powerline adapter. The rate is given in the following format:
“application data transmission rate / raw data transmission rate”. Application data reflects
more accurately how fast devices are transmitting application relevant traffic (for example
Internet Protocol (IP) traffic). Raw data refers to the whole payload of the packets transmitted
across the powerline network.
Receive Rate
(Mbps)
This field displays how fast information is received from the powerline adapter selected in the
table of the Network Name section to this powerline adapter. The rate is given in the following
format: “application data transmission rate / raw data transmission rate”. Application data
reflects more accurately how fast devices are transmitting application relevant traffic (for
example Internet Protocol (IP) traffic). Raw data refers to the whole payload of the packets
transmitted across the powerline network.
Table 25 Configuration Screen (continued)
LABEL DESCRIPTION
53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZyXEL PLA5236 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ZyXEL PLA5236

ZyXEL PLA5236 Kurzanleitung - Alle Sprachen - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info