Bedienungsanleitung ZyXEL VMG3625-T50A (Seite 301 von 434) (Englisch)

796875

301

Zoom out

Zoom in

Vorherige Seite

1/434

Nächste Seite

Chapter 23 Voice

VMG/XMG Series User’s Guide

301

Each field is described in the following table.

Table 121 VoIP > SIP > SIP Account > Add new account/Edit

LABEL DESCRIPTION

SIP Account Selection

SIP Account

Selection

This field displays ADD_NEW if you are creating a new SIP account or the SIP account

you are modifying.

SIP Service Provider Association

SIP Account

Associated with

Select the SIP service provider profile to use for the SIP account you are configuring

in this screen. This field is read-only when you are modifying a SIP account.

General

Enable SIP

Account

Select this if you want the Zyxel Device to use this account. Clear it if you do not

want the Zyxel Device to use this account.

SIP Account

Number

Enter your SIP address. In the full SIP URI, this is the part before the @ symbol. You can

use up to 127 printable ASCII characters.

Authentication

Username Enter the user name for registering this SIP account, exactly as it was given to you.

You can use up to 95 printable ASCII characters.

Password Enter the user name for registering this SIP account, exactly as it was given to you.

You can use up to 95 printable ASCII Extended set characters.

URL Type

URL Type Select whether or not to include the SIP service domain name when the Zyxel

Device sends the SIP address.

SIP - include the SIP service domain name.

TEL - do not include the SIP service domain name.

Voice Features

Primary

Compression Type

Secondary

Compression Type

Third Compression

Type

Select the type of voice coder/decoder (codec) that you want the Zyxel Device to

use.

G.711 provides high voice quality but requires more bandwidth (64 kbps). G.711 is

the default codec used by phone companies and digital handsets.

•G.711a is typically used in Europe.

•G.711u is typically used in North America and Japan.

G.726-24 operates at 24 kbps.

G.726-32 operates at 32 kbps.

G.722 is a 7 KHz wideband voice codec that operates at 48, 56 and 64 kbps. By using

a sample rate of 16 kHz, G.722 can provide higher fidelity and better audio quality

than narrowband codecs like G.711, in which the voice signal is sampled at 8 KHz.

The Zyxel Device must use the same codec as the peer. When two SIP devices start a

SIP session, they must agree on a codec.

Select the Zyxel Device’s first choice for voice coder/decoder.

Select the Zyxel Device’s second choice for voice coder/decoder. Select None if

you only want the Zyxel Device to accept the first choice.

Select the Zyxel Device’s third choice for voice coder/decoder. Select None if you

only want the Zyxel Device to accept the first or second choice.

Speaking Volume

Control

Select the loudness that the Zyxel Device uses for speech that it sends to the peer

device.

Listening Volume

Control

Select the loudness that the Zyxel Device uses for speech that it receives from the

peer device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL VMG3625-T50A Seite 301

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info