688688
344
Zoom out
Zoom in
Vorherige Seite
1/421
Nächste Seite
Chapter 35 Remote Management
VMG/XMG Series User’s Guide
344
The following table describes the fields in this screen.
35.3 The Trust Domain Screen
Use this screen to view a list of public IP addresses which are allowed to access the Zyxel Device through
the services configured in the Maintenance > Remote Management > MGMT Services screen.
Click Maintenance > Remote Management > Trust Domain to open the following screen.
Note: If this list is empty, all public IP addresses can access the Zyxel Device from the WAN
through the specified services.
Figure 219 Maintenance > Remote Management > Trust Domain
Table 152 Maintenance > Remote Management > MGMT Services
LABEL DESCRIPTION
WAN Interface
used for services
Select Any_WAN to have the Zyxel Device automatically activate the remote management
service when any WAN connection is up.
Select Multi_WAN and then select one or more WAN connections to have the Zyxel Device
activate the remote management service when the selected WAN connections are up.
Service This is the service you may use to access the Zyxel Device.
LAN/WLAN Select the Enable check box for the corresponding services that you want to allow access to the
Zyxel Device from the LAN/WLAN.
WAN Select the Enable check box for the corresponding services that you want to allow access to the
Zyxel Device from all WAN connections.
Trust Domain Select the Enable check box for the corresponding services that you want to allow access to the
Zyxel Device from the trusted hosts configured in the Maintenance > Remote MGMT > Trust
Domain screen.
If you only want certain WAN connections to have access to the Zyxel Device using the
corresponding services, then clear WAN, select Trust Domain and configure the allowed IP
address(es) in the Trust Domain screen.
Port You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes back to the Zyxel Device.
344

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

zyxel-vmg8623-t50a

Suche zurücksetzen

  • The Zyxel Device will not be able to join the workgroup if your local area network has restrictions
    set up that do not allow devices to join a workgroup. In this case, contact your network
    administrator. Eingereicht am 10-8-2021 16:14

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZyXEL VMG8623-T50A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info