796882
138
Zoom out
Zoom in
Vorherige Seite
1/434
Nächste Seite
Chapter 6 Broadband
VMG/XMG Series User’s Guide
138
6.4 The Broadband Advanced Screen
Use the Advanced screen to enable or disable ADSL over PTM, Annex M, DSL PhyR, and SRA (Seamless
Rate Adaptation) functions. The Zyxel Device supports the PhyR retransmission scheme. PhyR is a
retransmission scheme designed to provide protection against noise on the DSL line. It improves voice,
video and data transmission resilience by utilizing a retransmission buffer. It also lists ITU-T G.993.2
standard VDSL profiles you can comply with.
ITU-T G.993.2 standard defines a wide range of settings for various parameters, some of which are
encompassed in profiles as shown in the next table.
Data Budget
% of time
budget/data
budget
(Mbytes)/data
budget
(kPackets)
Select the check boxes and enter a number from 1 to 99 in the percentage fields. If you change
the value after you configure and enable budget control, the Zyxel Device resets the statistics.
Actions when
over budget
Specify the actions the Zyxel Device takes when the time or data limit is exceeded.
Current Cellular
connection
Select Keep to maintain an existing cellular connection or Drop to disconnect it.
Actions
Enable Email
Notification
Click this switch to enable or disable the email notification function. When the switch goes to the
right , the function is enabled. Otherwise, it is not.
The Zyxel Device will email you a notification whenever over budget occurs.
Mail
Account Select an email address you have configured in Maintenance > Email Notification. The Zyxel
Device uses the corresponding mail server to send notifications.
You must have configured a mail server already in the Maintenance > Email Notification screen.
Cellular
Backup
Email Title
Type a title that you want to be in the subject line of the email notifications that the Zyxel Device
sends.
Send
Notification
to Email
Notifications are sent to the email address specified in this field. If this field is left blank,
notifications cannot be sent via email.
Interval Type the interval of how many minutes you want the Zyxel Device to email you.
Enable Log Select this to activate the logging function at the interval you set in this field.
Cancel Click Cancel to return to the previous configuration.
Apply Click Apply to save your changes back to the Zyxel Device.
Table 34 Network Setting > Broadband > Cellular Backup (continued)
LABEL DESCRIPTION
138

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZyXEL VMG8825-Bx0B wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info