796882
231
Zoom out
Zoom in
Vorherige Seite
1/434
Nächste Seite
VMG/XMG Series User’s Guide
231
CHAPTER 11
Network Address Translation
(NAT)
11.1 NAT Overview
This chapter discusses how to configure NAT on the Zyxel Device. NAT (Network Address Translation -
NAT, RFC 1631) is the translation of the IP address of a host in a packet; for example, the source address
of an outgoing packet, used within one network, to a different IP address known within another network.
11.1.1 What You Can Do in this Chapter
Use the Port Forwarding screen to configure forward incoming service requests to the server(s) on your
local network (Section 11.2 on page 232).
Use the Port Triggering screen to add and configure the Zyxel Device’s trigger port settings (Section
11.3 on page 236).
Use the DMZ screen to configure a default server (Section 11.4 on page 239).
Use the ALG screen to enable and disable the NAT and SIP (VoIP) ALG in the Zyxel Device (Section
11.5 on page 240).
Use the Address Mapping screen to configure the Zyxel Device's address mapping settings (Section
11.6 on page 241).
Use the Sessions screen to configure the Zyxel Device's maximum number of NAT sessions (Section
11.6 on page 241).
11.1.2 What You Need To Know
Inside/Outside
Inside/outside denotes where a host is located relative to the Zyxel Device, for example, the computers
of your subscribers are the inside hosts, while the web servers on the Internet are the outside hosts.
Global/Local
Global/local denotes the IP address of a host in a packet as the packet traverses a router, for example,
the local address refers to the IP address of a host when the packet is in the local network, while the
global address refers to the IP address of the host when the same packet is traveling in the WAN side.
NAT
In the simplest form, NAT changes the source IP address in a packet received from a subscriber (the
inside local address) to another (the inside global address) before forwarding the packet to the WAN
231

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZyXEL VMG8825-Bx0B wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info