Bedienungsanleitung ZyXEL WAH7706 (Seite 36 von 101) (Englisch)

729908

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

Chapter 5 Wi-Fi

WAH7706 User’s Guide

Encryption

Mode

Select W PA, W PA2 , or W PA/ W PA2 to add security on this wireless network. The wireless

clients which want to associate to this network must have same wireless security settings as

the WAH7706. When you select to use a security, additional options appears in this screen.

Select W PA/ W PA2 to allow wireless devices that support either WPA or WPA2 to connect to

your WAH7706’s wireless network.

Select W PA to allow only wireless devices that support WPA to connect to your WAH7706’s

wireless network.

Select W PA2 to allow only wireless devices that support WPA2 to connect to your

WAH7706’s wireless network.

Or you can select N O ENCRYPTI ON to allow any client to associate this network without

any data encryption or authentication.

SSID Visibility Select D isa ble to hide the SSID in the outgoing beacon frame so a station cannot obtain the

SSID through scanning using a site survey tool. Otherwise, select Enable .

Wi-Fi Network

Mode

If you set W ire less Ba nd to 2 .4 GH z, you can use the 802.11 mode from the following:

• 8 0 2 .1 1 bgn : allows IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN

devices to associate with the WAH7706. The transmission rate of your WAH7706 might

be reduced.

If you set W ire less Ba nd to 5 GHz, you can use the 802.11 mode from the following:

• 8 0 2 .1 1 a/ n/ a c: allows IEEE802.11n, IEEE802.11a and IEEE 802.11c compliant WLAN

devices to associate with the WAH7706.

Channel Width This field displays the wireless channel width used by WAH7706.

A standard 20MHz channel offers transfer speeds of up to 144Mbps (2.4GHz) or 217Mbps

(5GHZ) whereas a 40MHz channel uses two standard channels and offers speeds of up to

300Mbps (2.4GHz) or 450Mbps (5GHZ).

Channel Set the channel depending on your particular region.

Select a channel or use Aut o Chann e l to have the WAH7706 automatically determine a

channel to use. If you are having problems with wireless interference, changing the channel

may help. Try to use a channel that is as many channels away from any channels used by

neighboring APs as possible. The channel number which the WAH7706 is currently using

then displays next to this field.

The following fields are available if you set En crypt ion M ode to W PA, W PA2 , or W PA/

W PA2 .

Encryption Type Select the encryption type (AES- CCMP or AUTO) for data encryption.

Select AES- CCMP if your wireless clients can all use AES- CCM P.

Select AUTO ( TKI P+ AES- CCMP) to allow the wireless clients to use either TKIP or AES-

CCMP.

Encryption Key The WEP keys are used to encrypt data. Both the WAH7706 and the wireless clients must

use the same WEP key for data transmission.

Select ASCI I in order to enter ASCII characters as WEP key. Select H EX in order to enter

hexadecimal characters as a WEP key.

Apply Click Apply to save your changes back to the WAH7706.

Reset Click Re se t to reload the previous configuration for this screen.

Table 17 Wi-Fi > Wi-Fi Settings

LABEL DESCRIPTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL WAH7706 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info