607184
11
Zoom out
Zoom in
Vorherige Seite
1/70
Nächste Seite
Chapter 1 Introduction
WRE2206 User’s Guide
11
The following table describes the LEDs and the WPS button.
1.4 The WPS Button
The WPS button can be used to begin WiFi Protected Setup (WPS), reboot the WRE2206 while
keeping it’s configuration or reboot the WRE2206 to factory default configuration.
Table 1 Front Panel LEDs and WPS Button
LED STATUS DESCRIPTION
Signal Strength 3 LED On The signal strength is 50-100%.
2 LED On The signal strength is 25-50%.
1 LED On The signal strength is <25%.
The WRE2206 is in the process of starting up.
Off No signal detected, disconnected or the LED is turned off in the firmware.
Number of
Clients Indicator
1 LED On The number of wireless clients connecting to the WRE2206 is greater than or
equal to ten.
2 LED On The number of wireless clients connecting to the WRE2206 is greater than or
equal to five, but less than ten.
3 LED On The number of wireless clients connecting to the WRE2206 is greater than or
equal to one, but less than five.
The WRE2206 is in the process of starting up.
Off The wireless LAN is not ready.
The number of wireless clients connecting to the WRE2206 is zero.
WPS On This remains on for 5 minutes after a successful WPS connection has been
established.
Blinking
Slowly
The WRE2206 is waiting for another WPS device to connect.
The WRE2206 is in the process of starting up, rebooting or resetting.
Blinking
Rapidly
The WRE2206 fails to connect to a router or AP using WPS.
Off There is no WPS connection established or a WPS connection has been
established for more than five minutes, or the LED is turned off in the
firmware.
Table 2 WPS Button Functions
ACTION RESULT
Push once or hold for
less than 5 seconds
The WRE2206 begins connecting to an AP via WPS. See Section 5.3 on
page 29.
Push twice The WRE2206 begins connecting to a wireless client via WPS. See Section
5.2 on page 26.
Hold for 5 to 10 seconds The WRE2206 keeps its configuration and reboots.
Hold for more than 10
seconds
The WRE2206 resets its configuration to factory defaults and reboots. See
Section 2.3 on page 14.
Push three times Push three times to turn off the WPS LED. After turning off the LED, the
WRE2206 disconnects the connection to a wireless client via WPS and
returns to the normal state.
The physical WPS button has priority over the WPS button in the Web
Configurator.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZyXEL WRE2206 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ZyXEL WRE2206

ZyXEL WRE2206 Kurzanleitung - Alle Sprachen - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info