730098
97
Zoom out
Zoom in
Vorherige Seite
1/113
Nächste Seite
Chapter 14 Troubleshooting
WRE6606 User’s Guide
97
When a client device connects through the WRE6606 to your router, the MAC address of the client
device shown on the router is translated to another MAC address. If your router's MAC filter or firewall is
enabled, the client device can connect to the WRE6606 but cannot get an IP address from the router
and cannot access the Internet.
To allow your client device to receive an IP address from the router and access the Internet, you must
provide the translated MAC address to the router.
1 Log into your router and disable the MAC filter and firewall. For more information on this, see your router's
documentation.
2 Turn on the WRE6606 and let all your wireless client devices connect to the WRE6606 wireless network.
Check that the 2.4 G and/or 5G LEDs on the WRE6606 are lit.
3 Log into your WRE6606, go to the Status screen and note down the MAC Addresses in the 2.4G and 5G
Association List.
4 Log into your router again, add the MAC addresses from the 2.4G and 5G Association List to the router's
MAC filter table and allow the MAC addresses to access the network.
5 Enable the router's MAC filter and firewall again.
14.5 Resetting the WRE6606 to Its Factory Defaults
If you reset the WRE6606, you lose all of the changes you have made. The WRE6606 re-loads its default
settings, and the password resets to 1234. You have to make all of your changes again.
Reset the WRE6606 if you forget your password or IP address, or you cannot access the Web
Configurator.
1 Make sure the power LED is on.
2 Press the WPS button for longer than 10 seconds, the Power LED begins to blink, to set the WRE6606 back
to its factory-default configuration.
OR
3 Click Maintenance > Backup Restore > Restore and then click Reset.
If the WRE6606 restarts automatically, wait for the WRE6606 to finish restarting, and log in to the Web
Configurator. The password is 1234.
If the WRE6606 does not restart automatically, disconnect and reconnect the WRE6606’. Then, follow the
directions above again.
97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZyXEL WRE6606 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ZyXEL WRE6606

ZyXEL WRE6606 Kurzanleitung - Englisch - 1 seiten

ZyXEL WRE6606 Kurzanleitung - Alle Sprachen - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info