607219
110
Zoom out
Zoom in
Vorherige Seite
1/150
Nächste Seite
Chapter 5 Managing Traffic
ZyWALL USG 20-2000 User’s Guide
110
5.4.5 Deploy the Backup ZyWALL
Connect ZyWALL Bs LAN interface to the LAN network. Connect ZyWALL B’s WAN interface to the
same router that ZyWALL A’s WAN interface uses for Internet access. ZyWALL B copies A’s
configuration (and re-synchronizes with A every hour). If ZyWALL A fails or loses its LAN or WAN
connection, ZyWALL B functions as the master.
5.4.6 Check Your Device HA Setup
1 To make sure ZyWALL B copied ZyWALL A’s settings, you can log into ZyWALL Bs management IP
address (192.168.1.5) and check the configuration. You can use the Maintenance > File
Manager > Configuration File screen to save copies of the ZyWALLs’ configuration files that you
can compare.
2 To test your device HA configuration, disconnect ZyWALL A’s LAN or WAN interface. Computers on
LAN should still be able to access the Internet. If they cannot, check your connections and device
HA configuration.
Congratulations! Now that you have configured device HA for LAN, you can use the same process
for any of the ZyWALL’s other local networks. For example, enable device HA monitoring on the
DMZ interfaces and use an Ethernet switch to connect both ZyWALLs’ DMZ interfaces to your
publicly available servers.
5.5 How to Configure DNS Inbound Load Balancing
This example shows you how to configure the ZyWALL to respond to DNS query messages with the
least loaded interface’s IP address. The DNS query senders will then transmit packets to that
interface instead of an interface that has a heavy load.
This example assumes that your company’s domain name is www.example.com. You want your
ZyWALL’s WAN1 (202.1.2.3) and WAN2 (202.5.6.7) to use DNS inbound load balancing to balance
traffic loading coming from the Internet.
1 In the CONFIGURATION > Network > Inbound LB screen, select Enable DNS Load
Balancing. Click Apply.
110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZyXEL ZyWALL USG 20 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ZyXEL ZyWALL USG 20

ZyXEL ZyWALL USG 20 Kurzanleitung - Deutsch, Englisch, Französisch, Italienisch, Spanisch, Schwedisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info