Bedienungsanleitung AAS Strum Acoustic GS-1 (Seite 63 von 91) (Englisch)

541314

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

6.7 Performance Parameters 63

only contain strumming sequences and the loop player is then used to play rhythmic or strumming

patterns over chords currently played on the keyboard. Using loops is useful to carefully control or

edit a performance or execute passages that are difﬁcult to play on the keyboard.

Loops are loaded using the Load button of the player. This

will open a folder from which loops can be selected. If a loop

was already loaded in the player, the Load button will open the

folder where this loop is located. If the player is empty, this

button will open a default loop folder which can be speciﬁed

in the Preferences dialog from the Edit menu of the application. Loops can also be loaded by

clicking on them and drag-and-dropping them onto the MIDI loop player.

Once a loop is loaded, its name is displayed in the top part of the loop player. Information on

the tempo and time signature of the loop is displayed just below its name. The loop is started by

clicking on the Play button located in the lower part of the player. Once a loop has been started,

it can be stopped by clicking on the Pause button and then restarted again by clicking on the Play

button. While a loop is being played, indication on the current position within the loop is displayed

on the right of the middle section of the player. The position is indicated, from left to right, as

the current bar number and current beat within this bar. When a loop is loaded in the player, it is

possible to scan the loops in the same folder using the skip forward and skip backward buttons.

The loops are scanned in alphabetical order starting from the currently loaded loop.

Once a loop has been selected, it might be necessary to modify it. A loop can rapidly be

exported to the MIDI track of a sequencer by using the Drag MIDI button. To export the loop,

click on the Drag MIDI button, then drag-and-drop the ﬁle onto a MIDI track of a sequencer.

Strum is supplied with a library of MIDI loops which you can use to easily start creating a new

piece. The factory setting for the default MIDI loop folder is the folder where the library was ﬁrst

copied when Strum was installed.

6.7.4 Strumming

The Strumming section includes parameters which are used to determine how

the strumming is performed. The Speed parameter controls how rapidly the dif-

ferent strings are played when a strum is triggered. The speed of the strum is

increased by turning the knob clockwise. This parameter can be modulated by the

keyboard velocity using the Velocity knob. When in its center position, the speed

is always that corresponding to the value of the Speed knob. Turning the velocity

knob clockwise increases the strumming speed for high keyboard velocities while

it reduces the speed for low keyboard velocities. Turning this knob below its mid-

dle position has the opposite effect; playing softly on the keyboard will increase

the strumming speed while playing hard will reduce the speed.

The Auto button is used to switch on or off the Auto-Strum mode. When this mode is on, notes

and chords will played by Strum as they are played on the keyboard. When Auto-Strum mode is

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AAS Strum Acoustic GS-1 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info