Bedienungsanleitung Abilia 429220 Gewa Control Medi Standard (Seite 31 von 44) (Englisch, Schwedisch)

677193

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

2.8 Adding a 4096-code

Control Medi is delivered with a special coded channel (4096) on the Code button

. The

code is selected randomly. This coded channel is normally used for functions that require

strict authorization such as apartment or house doors. The code has 4096 different

combinations.

The Code button always has the same code irrespective of which level you use. If you have

to program a new coded channel there are two methods of doing so. You can set the 4096

code on any level and button. It is recommended to keep the 4096 code on the Code

button.

NOTE! When you add a new coded channel it is added to just one level. If you want to use

the Code button with the same code on several levels, you must add it to each level.

Method one: record the code from another transmitter, as described under Recording IR

channels from another Transmitter.

For method two a binary code is entered. Make up the binary code yourself or else use a

code that is already set in an IR receiver or IR transmitter.

There are two types of IR receivers: an older type of receiver where you set the code with a

12-pole switch, or a newer type where the IR receiver is programmable. The principle is the

same when it comes to creating the binary code. Fig 3 shows a 12-pole switch. Switches 1,

4, 6 and 12 are in the “On” position, the others are in the “Off” position.

1 2 3 4 5 6 7 8 9 10 11 12

2048 1024 512 256 128 64 32 16 8 4 2 1

Off

Fig 3

The following example describes how the binary code is created according to method two:

1. First press

---

and then simultaneously press

for 2 seconds. When you release the

buttons the “Setting” alert sounds and the indication lamp on button 1 flashes.

2. Press

and then press

again.

3. Select the level where the 4096 code is to be set with

---

4. Select the button where the 4096 code should be saved. (Button

is recommended.)

5. Enter the code by pressing on

= switch in Off position and

= switch in On position.

Press twelve times in turn;

, (Fig 3).

6. If the action is successful, the “Success” alert sounds. If something goes wrong or takes

too long, the “Error” alert sounds.

7. The code is now set on your selected button. NOTE! The code above is just an example

and should be different for different users. Make a note of the chosen code for future

usage.

NOTE! If you have added a coded channel to the Code button and you want to use the

Code button with the same code on several levels, you must add it to each level individually.

Adding a 4096 code

Press

---

2 sec

, choose the level with

---

, choose the button

, then press

12 times.

= Off position.

= On position.

Default setting: Random code

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Abilia 429220 Gewa Control Medi Standard Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Abilia 429220 Gewa Control Medi Standard

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info