Bedienungsanleitung ACP RCS10TS (Seite 9 von 17) (Englisch)

660229

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

Interrupting

Operation

Open oven door or press STOP/

RESET key to interrupt operation.

Display continues to show

countdown time. Close door and

press START key to resume oven

operation.

Using the Oven Control (Electronic Control)

Manual Time Entry

To cook food using a specic entered time and power level.

1. Open oven door and place food in oven. Close door.

• READY displays. Fan and light will turn on.

2. Press TIME ENTRY key.

• READY and 0000 display.

• If pad does not work, open and close oven door and try again.

3. Enter cooking time by using the numbered keys.

4. Press a power level key to change power level if desired.

• POWER LEVEL displays with the power setting.

- 00 indicates 0% microwave power, 20 indicates 20%, 50

indicates 50% and 70 indicates 70% microwave power. If a

number is not displayed with POWER LEVEL the microwave is set

to full power.

5. If stage cooking is desired, press TIME ENTRY key and repeat steps 3

through 4.

• Display changes to cook time and power level for the next stage.

6. Enter cook time and power level as in steps 3 and 4.

• To add another cooking stage press TIME ENTRY key again.

• Up to four dierent stages can be programmed.

7. Press START key.

• Oven operates and time counts down.

• POWER, COOK LEVEL and cooking time display.

8. At end of cooking cycle oven beeps and shuts o.

Programmed Keys

To cook food using keys preprogrammed with cooking sequences.

1. Open oven door and place food in oven. Close door.

• READY displays. Fan and light will turn on.

2. Press desired key.

• For single key entry, press only one key.

• For double key entry, press the two keys, in order, of the double digit

number for the desired cooking sequence.

• To change single or double key entry option

see User Options section in this manual.

3. Oven begins to cook.

• POWER, power level and total cooking time display. If power level does

not display, microwave is cooking at full power.

• For additional cooking time, press preprogrammed key again

to begin cooking sequence again.

4. At end of cooking cycle oven beeps and shuts o.



Pad Time Pad Time

10 sec. 6 1:30 min.

20 sec. 7 2 min.

30 sec. 8 3 min.

45 sec. 9 4 min.

1 min. 0 5 min.

QTY X2 Key

To increase cooking time

by a specic cooking factor when

cooking more than one serving.

The cooking factor is a percentage

of the original cooking time (from

10 to 100%).

1. Open oven door and place food

in oven. Close door.

• READY displays. Fan and

light will turn on.

2. Press X2 key.

• Amount of time added is a

percentage of the original

preprogrammed cooking time.

• The percentage can be

changed. See Programming

the Oven Control section in

this manual.

3. Press desired preprogrammed

key or key sequence.

4. Oven begins cooking.

Displayed cooking time is the

total of original cooking time

plus the added X2 time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ACP RCS10TS Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ACP RCS10TS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info