Bedienungsanleitung Acronis Backup PC 11.5 Update 6 (Seite 107 von 248) (Englisch)

624431

107

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

1. If the disk or volume is recovered to its original location, the mapping process reproduces the

original disk/volume layout.

The original location for a disk or volume means exactly the same disk or volume that has been backed up.

A volume will not be considered original if its size, location or other physical parameters have been changed

after backup. Changing the volume letter or label does not prevent the software from recognizing the

volume.

2. If the disk or volume is recovered to a different location:

 When recovering disks: The software checks the target disks for size and volumes. A target

disk must contain no volumes and its size must be large enough to place the disk being

recovered. Not initialized target disks will be initialized automatically.

If the required disks cannot be found, you have to map the disks manually.

 When recovering volumes: The software checks the target disks for unallocated space.

If there is enough unallocated space, the volumes will be recovered "as is".

If unallocated space on the target disks is less than the size of the volumes being recovered,

the volumes will be proportionally shrunk (by decreasing their free space) in order to fit the

unallocated space. If the shrunk volumes still cannot fit the unallocated space, you have to

map the volumes manually.

5.1.4.2 Selecting target volumes

Available volume destinations depend on the agents operating on the machine.

Recover to:

Physical machine

Available when the Acronis Backup Agent for Windows or Agent for Linux is installed.

The selected volumes will be recovered to the physical disks of the machine the console is

connected to. On selecting this, you proceed to the regular volume mapping procedure described

below.

New virtual machine

 If Acronis Backup Agent for Windows or Agent for Linux is installed.

The selected volumes will be recovered to a new virtual machine of any of the following types:

VMware Workstation, Microsoft Virtual PC, Red Hat Kernel-based Virtual Machine (KVM), Red

Hat Enterprise Virtualization (RHEV), or Citrix XenServer Open Virtual Appliance (OVA).

The virtual machine files will be saved to the destination you specify in the Storage section. By

default, the new virtual machine will be created in the current user's documents folder.

 If Acronis Backup Agent for Hyper-V or Agent for VMware is installed.

These agents enable creating a new virtual machine on the virtualization server you specify.

By default, the new virtual machine will be created in the default storage of the virtualization

server. Whether you can change the storage on the virtualization server or not, depends on the

virtualization product brand and settings. VMware ESX(i) may have multiple storages. A

Microsoft Hyper-V server enables creating a new virtual machine in any local folder.

The new virtual machine will be configured automatically, the source machine configuration being

copied where possible. The configuration is displayed in the Virtual Machine Settings (p. 139) section.

Check the settings and make changes if necessary.

Then you proceed to the regular volume mapping procedure described below.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup PC 11.5 Update 6 Seite 107

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup PC 11.5 Update 6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info