624440
85
Zoom out
Zoom in
Vorherige Seite
1/248
Nächste Seite
85 Copyright © Acronis International GmbH, 2002-2015
2. Click Browse to specify a location for the DRP files.
4.7.8 E-mail notifications
This option is effective for Windows and Linux operating systems.
This option is not available when operating under the bootable media.
The option enables you to receive e-mail notifications about the backup task's successful completion,
failure or when user interaction is required.
The preset is: Disabled.
To configure e-mail notification
1. Select the Send e-mail notifications check box to activate notifications.
2. Under Send e-mail notifications, select the appropriate check boxes as follows:
When backup completes successfully.
When backup fails.
When user interaction is required.
3. Select the Add full log to notification check box if you want the e-mail notification to include log
entries for the operation.
4. In the E-mail addresses field, type the destination e-mail address. You can enter several
addresses separated by semicolons.
5. In the Subject field, type the notification subject.
The subject can include ordinary text and one or more variables. In the received e-mail messages,
each variable will be replaced by its value at the time of task execution. The following variables
are supported:
%description%
For a machine running Windows, the %description% variable will be replaced by the text that
is given in the Computer description field of the machine. To specify this text, either go to
Control panel > System or run the following command as an administrator:
net config server /srvcomment:<text>
For a machine running Linux, the %description% variable will be replaced by an empty string
("").
%subject%
The %subject% variable will be replaced by the following phrase: Task <task name> <task
result> on machine <machine name>.
6. In the SMTP server field, enter the name of the outgoing mail server (SMTP).
7. In the Port field, set the port of the outgoing mail server. By default, the port is set to 25.
8. If the outgoing mail server requires authentication, enter User name and Password of the
sender's e-mail account.
If the SMTP server does not require authentication, leave the User name and Password fields
blank. If you are not sure whether the SMTP server requires authentication, contact your
network administrator or your e-mail service provider for assistance.
9. Click Additional e-mail parameters... to configure additional e-mail parameters as follows:
a. From type the name of the sender. If you leave this field empty, the messages will contain
the sender's e-mail account in the From field.
85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Acronis Backup PC 11.7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Acronis Backup PC 11.7

Acronis Backup PC 11.7 Installationsanweisung - Deutsch - 17 seiten

Acronis Backup PC 11.7 Bedienungsanleitung - Deutsch - 282 seiten

Acronis Backup PC 11.7 Installationsanweisung - Englisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info