Bedienungsanleitung Acronis Backup PC 11.7 (Seite 86 von 248) (Englisch)

624440

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

b. Use encryption – you can opt for encrypted connection to the mail server. SSL and TLS

encryption types are available for selection.

c. Some Internet service providers require authentication on the incoming mail server before

being allowed to send something. If this is your case, select the Log on to incoming mail

server check box to enable a POP server and to set up its settings:

 Incoming mail server (POP) – enter the name of the POP server.

 Port – set the port of the POP server. By default, the port is set to 110.

 User name and Password of the incoming mail server.

d. Click OK.

10. Click Send test e-mail message to check whether e-mail notifications work correctly with the

specified settings.

4.7.9 Error handling

These options are effective for Windows and Linux operating systems and bootable media.

These options enable you to specify how to handle errors that might occur during backup.

Do not show messages and dialogs while processing (silent mode)

The preset is: Disabled.

With the silent mode enabled, the program will automatically handle situations requiring user

interaction (except for handling bad sectors, which is defined as a separate option). If an operation

cannot continue without user interaction, it will fail. Details of the operation, including errors, if any,

can be found in the operation log.

Re-attempt, if an error occurs

The preset is: Enabled. Number of attempts: 30. Interval between attempts: 30 seconds.

When a recoverable error occurs, the program re-attempts to perform the unsuccessful operation.

You can set the time interval and the number of attempts. The attempts will be stopped as soon as

the operation succeeds OR the specified number of attempts are performed, depending on which

comes first.

For example, if the backup destination on the network becomes unavailable or not reachable, the

program will attempt to reach the destination every 30 seconds, but no more than 5 times. The

attempts will be stopped as soon as the connection is resumed OR the specified number of attempts

is performed, depending on which comes first.

If Acronis Cloud Storage is selected as the primary, the second, or a further backup location, the option value is

automatically set to Enabled. Number of attempts: 300, regardless of the default value.

Ignore bad sectors

The preset is: Disabled.

When the option is disabled, the program will display a pop-up window each time it comes across a

bad sector and ask for a user decision as to whether to continue or stop the backup procedure. In

order to back up the valid information on a rapidly dying disk, enable ignoring bad sectors. The rest

of the data will be backed up and you will be able to mount the resulting disk backup and extract

valid files to another disk.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Backup PC 11.7 Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Backup PC 11.7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info