Bedienungsanleitung Acronis Disk Director 11 Advanced Server (Seite 36 von 94) (Englisch)

624424

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

To create a new volume

1. Run the Create Volume Wizard by right-clicking any unallocated space, and then click Create

volume.

2. Specify the type that the new volume will have. Every volume type is provided with a brief

description to let you better understand the advantages and limitations of each possible volume

type. To learn more about volume types—see Types of basic volumes (p. 16) and Types of

dynamic volumes (p. 16).

The list of volume types contains only the types that are supported (p. 18) by the current operating system.

3. Depending on the type of the new volume, specify one or more disks where you want to create

the new volume:

 If the new volume is basic, select one basic disk and specify one region of unallocated space

on that disk.

Note: You cannot create a basic volume on a disk that already has four primary volumes; you first need

to convert one of those volumes to logical—see Converting a primary volume to logical (p. 44). This

restriction does not apply to GPT disks.

 If the new volume is simple or spanned, select one or more disks.

 If the new volume is striped, select two or more disks.

 If the new volume is mirrored, select two disks.

 If the new volume is RAID-5, select three disks.

Note for striped, mirrored, and RAID-5 volumes: Because these volumes occupy space on their disks in

equal parts, the maximum size of such volume will depend on the selected disk with the least amount of

unallocated space.

When creating a dynamic volume and selecting one or several basic disks as its destination, the

selected disks will be converted to dynamic automatically.

4. Specify the size of the new volume. By default, the volume size is set to maximum. To specify a

different size, move the slider or enter the required value into the Volume size field.

If the disk still has unallocated space after you have set the size of the volume, you can set the

amount of unallocated space before and after the basic volume. To do this, drag the volume

within the unallocated space, or type the required amount of space before and after the volume

in the respective fields.

In the volume layout diagram at the bottom of the window, you can specify the space that the

volume will occupy on each of the selected disks, by typing the amounts or by dragging the

sliders.

5. Specify the following options of the new volume:

 File system (by default, NTFS). Some of the supported file systems (p. 10) will be disabled

depending on the chosen volume type and size—for example, FAT32 will be disabled if the

volume size has been set at more than 2 TB.

 Cluster size. Select the cluster size—the smallest amount of disk space which will be

allocated to store a file. We recommend leaving the default size, which is marked in the list

as (default). The default cluster size depends on the volume size and the type of the file

system—for example, the default cluster size for up to 2-TB NTFS volumes is 4 KB.

 Volume label (by default, NONE). A short name that you can assign to a volume to better

differentiate it from other volumes. The maximum length of a volume label depends on the

volume’s file system—see Changing a volume label (p. 43).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Disk Director 11 Advanced Server Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Disk Director 11 Advanced Server

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info