Bedienungsanleitung Acronis Disk Director 11 Advanced Server (Seite 37 von 94) (Englisch)

624424

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

 Letter (by default, the first free letter of the alphabet). Assign a drive letter to the volume to

be able to locate files and folders on it.

If the new volume is basic, specify whether it will be:

 Primary. Set the volume as Primary, if you plan to install an operating system on it. Mark the

primary volume as Active, if you need the machine to start from this volume.

 Logical. Set the volume as Logical, if it is intended for data storage.

6. Click Finish to add the pending volume creation operation.

The results of the pending operation are immediately displayed as if the operation had been

performed.

To perform the pending operation you will have to commit it (p. 24). Exiting the program without

committing the pending operations will effectively cancel them.

6.2 Resizing a volume

This operation extends a volume—whether basic or dynamic—by taking unallocated space from one

or more disks; or reduces a volume so that a portion of the volume’s free space becomes unallocated

space.

Extending a basic volume. A basic volume occupies a single region on a single basic disk. When you

extend a basic volume, you can choose to leave the disk as basic and use only the unallocated space

that is adjacent to the volume. Alternatively, you can choose to convert the disk to dynamic and use

unallocated space from all dynamic disks on your machine. In the second case, the volume will

become a simple or spanned volume.

Resizing a volume from which the machine or an operating system starts. You can resize the system

volume, a boot volume, or the active volume only when it is a basic volume.

To resize a volume

1. Select the volume that you want to resize, and then click Resize volume.

2. Specify the new size of the volume, by typing it or by moving the slider.

3. When resizing a basic volume:

 To be able to use only unallocated space that is adjacent to the volume, click Leave the

volume as basic. The volume will remain a basic volume.

 To be able to use unallocated space from all dynamic disks on the machine, click Convert the

volume to simple/spanned. The volume will be converted to a simple or spanned volume,

and the corresponding disk will become dynamic.

Note: This option is not available if the volume is the system volume, a boot volume, or the active

volume.

If you choose the Leave the volume as basic option, the following options are available:

 Append all unallocated disk space to the volume

With this option, all unallocated space on the disk will become adjacent to the volume that

you are resizing. This may involve relocating other volumes within the disk.

As a result you will be able to extend the volume by using all unallocated space, including the

unallocated space that is not currently adjacent to the volume, while keeping the disk as a

basic disk.

When this check box is selected, the following option is available:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Disk Director 11 Advanced Server Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Disk Director 11 Advanced Server

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info