Bedienungsanleitung Acronis Disk Director 11 Advanced Server (Seite 58 von 94) (Englisch)

624424

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

To perform the pending operation you will have to commit it (p. 24). Exiting the program without

committing the pending operations will effectively cancel them.

7.5 Disk conversion: basic to dynamic

You would want to convert a basic disk to dynamic in the following cases:

 If you plan to use the disk as part of a dynamic disk group

 If you want to achieve additional disk reliability for data storage.

To convert a basic disk to dynamic

1. Right-click the basic disk you want to convert, and then click Convert to dynamic. You will receive

a final warning about the basic disk being converted to dynamic.

2. Click OK to add the pending basic to dynamic disk conversion operation.

Note: A dynamic disk uses the last megabyte of the physical disk to store the database, including the four-level

description (Volume-Component-Partition-Disk) for each dynamic volume. If during the conversion to dynamic it

turns out that the basic disk is full and the size of its volumes cannot be decreased automatically, the basic disk

to dynamic conversion operation will fail.

The results of the pending operation are immediately displayed as if the operation had been

performed.

To perform the pending operation you will have to commit it (p. 24). Exiting the program without

committing the pending operations will effectively cancel them.

Should you decide to revert your dynamic disks back to basic ones—for example, if you want to start

using an operating system on your machine that does not support dynamic disks—you can convert

your disks using the same menu items, though the operation now will be named Convert to basic.

System disk conversion

The program does not require an operating system reboot after conversion of a basic disk that

contains one or more boot volumes to dynamic if:

1. There is a single Windows Server 2008, Windows Vista, or Windows 7 operating system installed

on the disk.

2. The machine runs this operating system.

Caution: The conversion of a disk containing boot volumes takes a certain amount of time. Any power loss,

unintentional turning off of the machine or accidental pressing of the Reset button during the procedure could

result in bootability loss.

For machines where more than one operating system is installed, the program ensures bootability of

each of the operating systems.

7.6 Disk conversion: dynamic to basic

You would want to convert dynamic disks back to basic ones if, for example, you want to start using

an operating system your machine that does not support dynamic disks.

This operation is available only for a dynamic disk that is empty or contains only one or more simple volumes,

with each simple volume occupying a single region on the disk. These volumes will become basic volumes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Disk Director 11 Advanced Server Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Disk Director 11 Advanced Server

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info