Bedienungsanleitung Acronis True Image Echo Workstation (Seite 30 von 157) (Englisch)

624434

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

3. At the same time, Acronis True Image Echo Workstation proceeds with the complete

sector-by-sector image restoration in the background. However, the requested sectors

have the highest priority.

Finally, the image will be fully restored even if the user performs no actions at all. But if

you choose to start working as soon as possible after the system failure, you will gain at

least several minutes, considering that restoration of a 10-20GB image (most common

image size) takes about 10 minutes. The larger the image size, the more time you save.

3.6.3 How to use

To be able to use Acronis Active Restore, prepare your system this way: (you can do it

either locally, using Acronis True Image Echo Workstation local version, or remotely using

Acronis True Image Management Console):

1. Install Acronis True Image Echo Workstation local version or Acronis True Image Agent

on the local computer.

2. Create the Acronis Secure Zone on the local computer hard disk (see

Chapter 9.

Managing the Acronis Secure Zone

3. Activate Acronis Startup Recovery manager (see

3.4 Acronis Startup Recovery

Manager

) and create bootable media or RIS package with Acronis True Image Echo

Workstation (see

Chapter 10. Creating bootable

media).

4. Back up (image) the local computer’s system disk to Acronis Secure Zone (see

6.2 Backing up disks and partitions (image

backup)). You can back up other

disks/partitions as well, but the system image is mandatory.

When performing Active Restore, the current Acronis True Image Echo Workstation

version always restores the entire system disk. Therefore, if your system disk consists of

several partitions, all of them must be included in the image. Any partitions which are

missing from the image will be lost.

If failure occurs, boot the local computer from the bootable media, or RIS server, or using

F11. Start the recovery procedure (see

7.3 Restoring disks/partitions or files from

images

), select the system disk image from Acronis Secure Zone, choose Use Active

Restore and in the next window click Proceed. In a few seconds the computer will

reboot to the restored system. Log in and start work – no additional reboots or other

actions are required.

You can perform Active Restore running Acronis True Image Echo Workstation in

Windows operating systems as well. However, it is mandatory to have bootable media in

case Windows cannot boot.

3.7 Acronis Universal Restore

3.7.1 Acronis Universal Restore purpose

A system disk image can be deployed easily on the hardware where it was created or to

identical hardware. However, if you change a motherboard or use another processor

version — a likely possibility in case of hardware failure — the restored system could be

unbootable. An attempt to transfer the system to a new, much more powerful computer

will usually produce the same unbootable result because the new hardware is

incompatible with the most critical drivers included in the image.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis True Image Echo Workstation Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis True Image Echo Workstation

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info