Bedienungsanleitung Acronis True Image Echo Workstation (Seite 31 von 157) (Englisch)

624434

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

Using Microsoft System Preparation Tool (Sysprep) does not solve this problem, because

Sysprep permits replacing drivers only for Plug-and-Play devices (sound cards, network

adapters, video cards etc.). As for system Hardware Abstraction Layer (HAL) and mass

storage device drivers, they must be identical on the source and the target computers

(see Microsoft Knowledge Base, articles 302577 and 216915).

Acronis Universal Restore technology provides an efficient solution for hardware-

independent system restoration by replacing the crucial Hardware Abstraction Layer (HAL)

and mass storage device drivers.

Acronis Universal Restore is applicable for:

1. Instant recovery of a failed system on different hardware

2. Hardware-independent cloning and deployment of operating systems

3. Real-to-virtual and virtual-to-real computer migration for system recovery, test and

other purposes.

3.7.2 Acronis Universal Restore general principles

1. Automatic HAL and mass storage drivers selection

Acronis Universal Restore searches the Windows default driver storage folders (in the

image being restored) for HAL and mass storage device drivers and installs drivers that

better fit the target hardware. You can specify a custom driver repository (a folder or

folders on a network drive or CD) which will also be used for drivers search.

The Windows default driver storage folder is determined in the registry key

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current version\DevicePath. This

storage folder is usually WINDOWS/inf.

2. Manual selection of mass storage device driver

If the target hardware has a specific mass storage controller (such as a SCSI, RAID, or

Fibre Channel adapter) for the hard disk, you can install the appropriate driver manually,

bypassing the automatic driver search-and-install procedure.

3. Installing drivers for plug and play devices

Acronis Universal Restore relies on built-in plug and play discovery and configuration

process to handle hardware differences in devices that are not critical for the system

start, such as video, audio and USB. Windows takes control over this process during the

logon phase, and if some of the new hardware is not detected, you will have a chance to

install drivers for it later manually.

3.7.3 Acronis Universal Restore and Microsoft Sysprep

Acronis Universal Restore is

not

a system preparation tool. You can apply it to any system

image created by Acronis products, including images prepared with Microsoft System

Preparation Tool (Sysprep). The following is an example of using both tools on the same

system.

Acronis Universal Restore does not strip security identifier (SID) and user profile settings

in order to run the system immediately after recovery without re-joining the domain or re-

mapping network user profiles. If you are going to change the above settings on a

recovered system, you can prepare the system with Sysprep, image it and restore, if need

be, using Acronis Universal Restore.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis True Image Echo Workstation Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis True Image Echo Workstation

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info