Bedienungsanleitung ACV HP300C (Seite 8 von 118) (Englisch, Holländisch, Französisch)

677362

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

The temperatures of typical heat pump cycles, in connection with features of the cooling fluid and the

free source ensure heating of sanitary water located in the aluminium pipe heat exchanger placed outside of

HB300(C) heat pump water heater up to a temperature of max. 60°C, besides normal usage conditions. As

HB300(C) heat pump water heater has been equipped with a supplementary pipe radiator that provides further

options: quicker obtaining of operation with full capacity through combination of heat pump mode and pipe

radiator mode up to a temperature of max. 60°C that may be used after running of antibacterial protective

cycles. In order to ensure rational energy use during the operation of the hot water tank, visual indicators call

the attention of the user on the fact that the appliance is not operated in the most efficient way if the pipe

radiator is active.

2.3. Water heating methods

The appliance (in case of HB300C type) integrates heating elements that contain a heat pump, an electric pipe

radiator and a heat exchange pipe coil. Heating elements do not operate all the three in the same time. Hot water

tanks of HB300C type can be operated from several different energy sources: indirectly from solar energy, or

gas-based, coal-based or other based energy carriers, furthermore, auxiliary electric heating provided by

appliances of HB300(C) type is controlled by the heat pump unit.

This appliance possesses two temperature-sensors that are placed in the upper flare located in the

closing cover and in the lower flare. The sensor placed in the upper flare measures upper temperature and this

number is displayed by the Water temp indicator, while the sensor placed in the lower flare monitors the lower

temperature, which serves as input data for switch on/ off, but this is not displayed at all.

1.) Economy Mode:

In this mode, it is the heat pump that is working, not the electric heater as a result of pre-set water

temperature.

(The water outlet temperature is between 38~60C, the operation environment temperature is between -7~43C)

2.) Hybrid Mode:

In this mode, the equipment is sharing its operation capabilities between electric heating and heat pump,

based on the temperature of the water tank.

(The water outlet temperature is between 38~60C, the operation environment temperature is between -30~43C)

3.) E-heater Mode:

In this mode, the motors of the compressor and the fan are not working, only the electric heater is working. This time, only water

located in the upper part of the tank is heated, which means. approximately 100 l.

(The water outlet temperature is between 38~60C, the operation environment temperature is between -30~43C)

a) Defreezing through water heating

In case of Economy Mode and Hybrid Mode, if the evaporating steam freezes in cold environment, the

appliance defreezes it automatically, to ensure efficient performance (3~10 min).

b) External environmental temperature

The operation temperature of the appliance should be within the interval -30~43 C and the operation

temperatures of the modes are described below in details.

2.4. Explanation of water heating operation

1) Economy Mode: -7~43C

This mode is recommended when the external environmental temperature is between -7~43C . If the

external environmental temperature falls under the temperature of -7C, energy efficiency becomes low,

evidently, thus it is recommended to use E-heating mode under these circumstances.

2) Hybrid Mode: -30~43C

3) E-heater Mode: -30~43C

In each case, only water located in the upper part of the tank is heated, which means. approximately 100

2.5 Mode selection

As different modes have been developed to serve different needs, it is recommended to consider the following: .

 Economy Mode:-7~43C,

In case of continuous hot water need under 300 L (60 C);

 Hybrid Mode: -30~43C,

In case of continuous hot water need between 300 L (60C).

 E--heater Mode: -30~43C,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ACV HP300C Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info