Bedienungsanleitung ADB Domino 48 (Seite 51 von 68) (Englisch)

461421

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

DOMINO 24 & 48 USER MANUAL

www.adblighting.com

User Manual - page 49

Issue 1.2

14. FLASH

14.1 OVERVIEW

The FLASH section of the utilises the “f/a” (Flash/Assign) buttons in the fader Bank B

sections provide extensive flashing control. When a channel is “flashed” it can either “add” to

the current output of the desk or it can be “solo” where it becomes the ONLY output

You may Flash any channel, fixture or multiple channels or fixtures, any submaster, or any

multiple combination of the above at the one time. The only limit is your ability to hold down

multiple buttons. The Flash function is a momentary action. As soon as all Flash buttons are

released, normal output is restored.

There are no times associated with the FLASH function. All actions are instantaneous.

14.2 ADD/SOLO MODE

You may select what effect the Flash buttons have on the output, by selecting either ADD

mode or SOLO mode.

Pressing the [ADD/SOLO] button will toggle from one mode to the other.

SOLO mode is indicated when LED in the ADD/SOLO button flashes.

• In ADD mode, pressing any FLASH button will add the flashed channels to the output (at

the FLASH control level) without having any effect on the current output.

• In SOLO mode, pressing any FLASH button will add the flashed channels to the output (at

the FLASH control level) and at the same time it will KILL (black out) all other output. The

flashed object is now the solo output.

14.3 FLASH LEVEL

The FLASH level control sets the percentage level at the output of the FLASH section for all

channels when they are flashed.

• For individual channels and fixtures, the Flash level sets the actual level of any flashed

channels.

• For the contents of any submaster it will be the percentage of the channels recorded

level.

For example, if the Flash level is set to its mid (50%) position;

• Flashed channels/fixtures will come on at a level of 50%.

• If a submaster memory is Flashed and it contains a channel at a level of 80% then that

channel will come on at 40% (50% of 80%).

If the FLASH level is set to minimum, then no channels will come on when a FLASH button is

pressed.

If the DOMINO is in ADD mode, and a channel is already ON when it is flashed, the flash

level acts together with any existing level for that channel on a Highest Takes Precedence

(HTP) basis.

Warning: Setting the FLASH LEVEL control to minimum and the ADD/SOLO mode to SOLO

will cause all of the FLASH buttons to act as DBO (Dead Black Out) buttons.

Pressing a FLASH button will cause its channel(s) to come on at 0% and all

normal output to be killed.

Hint: To safeguard against inadvertently “flashing” any lights on stage or killing the output,

you can set the FLASH LEVEL control to minimum and the ADD/SOLO mode to ADD.

Pressing any FLASH button will now have no effect.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ADB Domino 48 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ADB Domino 48

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info