Bedienungsanleitung ADB Domino 48 (Seite 52 von 68) (Englisch)

461421

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

DOMINO 24 & 48 USER MANUAL

www.adblighting.com

User Manual - page 50

Issue 1.2

15. PATCH

15.1 OVERVIEW

The “patch” allows you to patch (connect) DMX slots (addresses) to channel (fader) numbers

enabling to control up to 512 DMX slots. Patches are required when;

• A particular channel number is to control a different DMX (dimmer) slot number.

• A single channel is to control several different DMX slots.

• There are more DMX slots to be controlled than there are desk channels.

A direct 1 to 1 connection from channels to their respective DMX slots can be selected to

speed up the patching process.

The patch allows you to patch any DMX slot to any channel number. A patch level may be

set for every patch. A single channel may be patched to multiple DMX slots.

If no patches exist, either due to a “Total Reset” or if all patches have been removed (below)

the patch will be automatically bypassed giving a direct 1 to 1 connection between channel

numbers and their matching DMX slot numbers. When any patch is made by the user, the

bypass is automatically removed and only the user’s patches will exist.

15.2 REMOVE All PATCHES

To remove ALL patches; HOLD [function], tap [patch]. Press; [remove], [yes].

The patch is now automatically bypassed providing a 1 to 1 patch.

15.3 PATCHING

Patching is performed by “editing the patch”.

To edit the patch; HOLD [function], tap [patch], press [edit].

To select the dimmers DMX slot number, press [<] or [>] or rotate the EDIT Wheel.

To patch the selected DMX slot to a channel number, press the [f/a] button of the channel

number The channel f/a button will flash to show the patch.

To select another dimmers DMX slot number, press [<] or [>] or rotate the EDIT Wheel and

patch it to a channel by pressing the channels [f/a] button. Continue to select DMX slots and

patch them to channels.

As each patch is made, the optional video output screen Video 2 shows the channel number

and name, DMX slot and patch level.

Patched channels f/a buttons remain lit.

When scrolling through the DMX slots, as each slot number is selected, if a channel is

patched to that slot, its f/a button will flash.

When finished patching, press; [edit].

The patch is automatically saved

15.4 PATCHING MULTIPLE SLOTS

To automatically patch a sequential range of DMX slots to a sequential range of channels,

edit the patch (above), then select the first DMX slot number in the sequence. Press and

HOLD the [f/a] button of the channel number to be patched to that slot then tap the [f/a]

button of the channel to be patched to last DMX slot number in the sequence. All channels in

the selected range are automatically patched to their respective slots.

For example, to patch a rack of 12 dimmers with a starting DMX slot of 100 to channels 13 to

24 respectively, press [<] or [>] or rotate the EDIT Wheel to select DMX slot100, then press

and HOLD [f/a] (13) and tap [f/a] (24).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ADB Domino 48 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ADB Domino 48

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info