Bedienungsanleitung Ade BA 719 Tanja (Seite 8 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

641847

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

4. Weighing function (weight measurement only)

1. Switch on the scale by using the step-on-function. Just step on the scale. Remain

stationary on the weighing platform and do not hold you tight. After a few seconds,

your weight will be indicated.

2. After weighing, step off the scale. The scale will switch off automatically after a few

seconds.

5. Programming / Enter of personal data

Before first time use your personal data (gender: female or male, body height, age) must

be programmed and saved under selected locations P-01 up to P-12 (for up to 12

persons). The enter keys are located at the head front of the scale. To enter your

personal data please utilise the buttons:  (minus button),  (plus button), SET (save

button) and follow the particular points:

1. Place the scale on a table. Switch on the scale by pressing the SET-button, the

display indicates a flashing “ P-01” . To select your personal location (P-01 – P-12),

press the  or  button. After the selection of your personal location, press the

SET-button to save the reading.

2. After you selected your personal location, the symbol for gender starts to flash. To

select the requested gender press the  or  button. After the selection of your

gender press the SET-button to save the reading.

3. After you selected your gender, the symbol for body height starts to flash. To enter

your heights press the  or  button. After the selection for your height press the

SET-button to save the reading.

4. After you selected your body height, the symbol for age starts to flash. To enter your

age press the  or  button. After the selection of your age press the SET-button

to save the reading.

5. After input completion, the display indicates again your entered location (the entered

personal location can be changed by using the  or  button) and your entered

personal data. A few seconds later, the scale automatically powers off. To enter

personal data of further persons please repeat the steps listed below.

6. Body Analysis

An analysis is only possible in bare feet. Your personal data must be entered first (please

see page 4 - 5).

1. Press the SET-button and select your personal location by using the  or  button.

2. At first, your personal data will be displayed (age, body height, and gender). Shortly

after that, „ 0.0“ will be indicated. As soon as the display shows „ 0.0“ the scale is

prepared for the measurement.

3. Carefully step on the scale in bare feet and remain stationary while the measurement is

now taking place.

4. After completion of the measurement will appear in a sequence:

1. your body fat, your actual weight, your body height, and your age

2. your body water, your ideal weight, and your actual calories

3. your muscle mass, your bone mass, and your daily-required calories

EXAMPLE:

1. 2. 3.

5. After weighing, step off the scale. The scale switches off automatically after a few

seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ade BA 719 Tanja Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info