Bedienungsanleitung Adler AD 4813 (Seite 9 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

799984

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

inside fuse will be broken due to wrong way of operation. In such situation the device cannot work anymore.

REMARK: When the device is clogged due to some object inside the worm gear such us bone, switch off the device immediately.

Kebbe function operation

Use your favorite recipe for the stuffing and an outside dough of Kebbe.

1.Remove the cutting plate (14, 15 or 16) and cross cutting blade (10).

2.Place kebbe attachments (11) onto the worm gear shaft (9) shaft together. Next fit both protrudes in slots. Look at picture 8.

3.Screw the nut (13) into place until tight. Look at picture 9. Do not over tighten.

4. Use the food pusher (1) to move previously prepared dough through the grinding chamber (8) to get cylindrical shape Kebbe dough.

Look at picture 10.

5.Form kebbe as illustrated at picture 11 and deep fry.

Sausage function operation

1.Before starting please assemble sausage attachment (12) as shown at picture 12.

2.Use the food pusher (1) to move slowly the food into the gut overlapped on the sausage attachment (12).

Shredding function operation

1.Press the grinder chamber button (3), hold the shredder head (21) and insert it into the motor gear nest (7). When inserting please pay

your attention the shredder head (21) must be slanted. Look at picture 13. Then move the shredder head (21) anticlockwise, so that the

head being fastened tightly .

2.Put one of shredding attachments (17 or 18 or 19) into the shredder head (21). Look at picture 14.

Note: The chosen shredding attachment must be place deeply.

3. The knob (5) switch to “ON” position to start cutting. Move the food from the tray (2) to the shredder head (21) and then push down it by

the food pusher (20) with not big power. Look at picture 14.

4. After use switch the device off and unplug it from the power supply.4. After use switch the device off and unplug it from the power

supply.

Disassembling

1.Make sure that the motor has stopped completely.

2.Disconnect the plug from the power outlet.

3.Disassemble by reversing all steps from 1-7 pictures.

4.To remove the cutting plate easily, place a knife between the cutting plate and the grinding chamber (8) as illustrated at picture 16 and

lift it up.

5.Press the grinding chamber button (3)，move the grinding chamber (8) as per direction illustrated at picture 17. Then you can take out

the grinding chamber (8).

CLEANING AND MAINTENANCE

Look at chart C for help you clean the device in correct way.

1.Before cleaning the device, be sure the power cord unplugged from the power outlet and the speed control knob is on the "0" position.

Let the device cools down before cleaning. Remove meat, etc.

2.Disassemble all accessories from motor unit (6). Do not clean the accessories while mounted on the machine's drive assembly.

3.Don't use aggressive detergents to clean the motor housing (6), as it may remove the informational graphic symbols such as: scale,

safety marks, etc.

4.Do not wash the metal parts in dishwashers. Aggressive cleaning agents used in dishwashers cause the metal parts to turn black. Use

soft brush. A bleaching solution containing chlorine will discolor aluminum surfaces. Handwash the metal parts using traditional washing-

up liquid.

5.Wipe the external parts with kitchen towel or soft cloth.

6. Do not use abrasive materials to clean the device.

7. Wipe all the cutting parts by vegetable oil-wet cloth.

8. Do not immerse the motor unit (6) in water, but only wipe it with a damp cloth.

TECHNICAL DATA

Power supply: 220-240V ~50/60Hz

Power: 600W

Max Power: 2000W

Max operation time in one cycle: 18 minutes.

Minimum rest time between cycles: 10 minutes at least.

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste

bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may

effect the environment. Do not dispose this appliance in the common waste bin.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler AD 4813 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info