Bedienungsanleitung Adobe ACROBAT DC - 2015 (Seite 490 von 538) (Englisch)

618537

490

Zoom out

Zoom in

Vorherige Seite

1/538

Nächste Seite

484

Print production tools (Acrobat Pro DC)

Last updated 4/7/2015

About ink trapping

When an offset printed document uses more than one ink on the same page, each ink must be printed in register

(perfectly aligned) with any other inks that it abuts, so that there is no gap where the different inks meet. However, it’s

impossible to ensure exact registration for every object on every sheet of paper running through a printing press, so

misregistration of inks can occur. Misregistration causes an unintended gap between inks.

You can compensate for misregistration by slightly expanding one object so that it overlaps an object of a different

color—a process known as trapping. By default, placing one ink over another knocks out, or removes, any inks

underneath to prevent unwanted color mixing; but trapping requires that inks overprint, or print on top of each other,

so that at least a partial overlap is achieved.

Most traps employ spreading—expanding a light object into a dark object. Because the darker of two adjacent colors

defines the visible edge of the object or text, expanding the lighter color slightly into the darker color maintains the

visual edge.

Adobe In-RIP trapping

Acrobat can automatically trap color documents with the Adobe In-RIP Trapping engine, which is available on Adobe

PostScript output devices that support Adobe In-RIP Trapping.

Adobe In-RIP Trapping can precisely calculate and apply any necessary adjustments to the edges of type and graphics

throughout your document. It can apply effective trapping techniques to different parts of a single object, even if the

object overlaps several different background colors. Trapping adjustments are made automatically, and you can define

trap presets to address the trapping requirements of specific page ranges. The effects of trapping are apparent only on

color separations generated by the trapping engine; you cannot see the results onscreen within the program.

The trapping engine decides where to trap by detecting contrasting color edges. It then creates traps based on the

neutral densities (lightness or darkness) of abutting colors, in most cases by spreading lighter colors into adjacent

darker colors. The trapping settings you specify in the Trap Presets palette modify the trapping engine’s results.

Requirements

Adobe In-RIP Trapping requires the following software and hardware:

• A PPD (PostScript Printer Description) file for a printer that supports Adobe In-RIP Trapping. You must select this

PPD by using the operating system driver.

• An Adobe PostScript Level 2 or later output device that uses a RIP that supports Adobe In-RIP Trapping. To find

out if a PostScript output device supports Adobe In-RIP Trapping, contact the manufacturer or your print service

provider.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adobe ACROBAT DC - 2015 Seite 490

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Adobe ACROBAT DC - 2015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info