Bedienungsanleitung Adobe ACROBAT DC - 2015 (Seite 491 von 538) (Englisch)

618537

491

Zoom out

Zoom in

Vorherige Seite

1/538

Nächste Seite

485

Print production tools (Acrobat Pro DC)

Last updated 4/7/2015

Trap a PDF

Trapping is a complex process that depends on the interaction of various color, ink, and printing factors; the correct

settings vary, depending on specific press conditions. Do not change the default trap settings unless you’ve consulted

with your print service provider.

1 If necessary, choose Tools > Print Production > Trap Presets to create a trap preset with custom settings for your

document and printing press conditions.

2 Assign the trap preset to a page range.

3 Choose File > Print to open the Print dialog box, and then click Advanced.

4 Select Output from the list on the left.

5 For Color, choose In-RIP Separations.

6 For Trapping, choose Adobe In-RIP.

Note: This option works only when you target an output device that supports Adobe In-RIP Trapping.

7 Click Ink Manager. As necessary, select an ink, specify the following options (only if your service provider

recommends changing the settings), and then click OK:

Type Choose an ink type that describes the selected ink.

Neutral Density Type a value that differs from the default.

Trapping Sequence Type a value to set the order in which inks are printed.

8 Continue specifying other print options, and then click OK to print your document.

Specify settings using trap presets

A trap preset is a collection of trap settings you can apply to pages in a PDF. Use the Trap Presets dialog box for entering

trap settings and saving a collection of settings as a trap preset. If you don’t apply a trap preset to a trapping page range,

that page range will use the [Default] trap preset, a collection of typical trap settings that are applied to all pages of a

new document.

Note: In Acrobat, trap presets and their assignments apply to the document only while it is open; trap settings are not saved

in the PDF. This behavior is different from InDesign, where trap presets and their assignments are saved with the InDesign

document.

Create or modify a trap preset

Choose Tools > Print Production >Trap Presets.

1 Select an existing preset, and then click Create.

2 Specify the following options, and then click OK:

Name Type a name for the preset. You cannot change the name of either of the two built-in presets: [No Trap Preset]

and [Default].

Trap Width Type values to specify the amount of overlap for inks.

Trap Appearance Specify options for controlling the joins and ends of the traps.

Images Specify settings that determine how to trap images.

Trap Thresholds Type values to specify the conditions under which trapping occurs. Many variables affect the

values you’ll need to enter here. For more information, consult with your print service provider, and see the other

trapping topics.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adobe ACROBAT DC - 2015 Seite 491

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Adobe ACROBAT DC - 2015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info