Bedienungsanleitung Adobe ILLUSTRATOR CS4 (Seite 418 von 499) (Englisch)

548144

418

Zoom out

Zoom in

Vorherige Seite

1/499

Nächste Seite

411

USING ADOBE ILLUSTRATOR CS4

Printing

2 Select a printer and PPD file. To print to a file instead of a printer, select Adobe PostScript® File or Adobe PDF.

3 Select Output on the left side of the Print dialog box.

4 For Mode, select either Separations (Host-Based) or In-RIP Separations.

5 Specify an emulsion, image exposure, and printer resolution for the separations.

6 Set options for the color plates you want to separate:

• To disable printing of a color plate, click the printer icon next to the color in the Document Ink Options list.

Click again to restore printing for the color.

• To convert all spot colors to process colors, so that they are printed as part of the process-color plates rather than

on a separate plate, select Convert All Spot Colors To Process.

• To convert an individual spot color to process colors, click the spot color icon next to the color in the Document

Ink Options list. A four-color process icon appears. Click again to revert the color back to a spot color.

• To overprint all black ink, select Overprint Black.

• To change the screen frequency, screen angle, and shape of halftone dots for a plate, double-click the ink name.

Alternatively, click the existing setting in the Document Ink Options list, and make the desired changes. Note

however, that the default angles and frequencies are determined by the selected PPD file. Check with your print

shop for the preferred frequency and angle before creating your own halftone screens.

If your art contains more than one spot color, particularly interactions between two or more spot colors, assign

different screen angles to each spot color.

7 Set additional options in the Print dialog box.

In particular, you can specify how to position, scale, and crop the artwork; set up printer’s marks and a bleed; and

choose flattening settings for transparent artwork.

8 Click Print.

Note: To see a video on using the Separations Preview panel, see www.adobe.com/go/lrvid4021_ai.

See also

“Change the printer resolution and screen frequency” on page 408

“Print an object on all plates” on page 412

“Print dialog box options” on page 405

Color separation modes

Illustrator supports two common PostScript workflows, or modes, for creating color separations. The main difference

between the two is where separations are created—at the host computer (the system using Illustrator and the printer

driver), or at the output device’s RIP (raster image processor).

In the traditional host-based, preseparated workflow, Illustrator creates PostScript data for each of the separations

required for the document, and sends that information to the output device.

In the newer RIP-based workflow, a new generation of PostScript RIPs perform color separations, trapping, and even

color management at the RIP, leaving the host computer free to perform other tasks. This approach takes less time for

Illustrator to generate the file, and minimizes the amount of data transmitted for any given print job. For example,

instead of sending PostScript information for four or more pages to print host-based color separations, Illustrator

sends the PostScript information for a single composite PostScript file for processing in the RIP.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adobe ILLUSTRATOR CS4 Seite 418

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Adobe ILLUSTRATOR CS4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info