Bedienungsanleitung Adobe ILLUSTRATOR CS4 (Seite 419 von 499) (Englisch)

548144

419

Zoom out

Zoom in

Vorherige Seite

1/499

Nächste Seite

412

USING ADOBE ILLUSTRATOR CS4

Printing

Emulsion and image exposure

Emulsion refers to the photosensitive layer on a piece of film or paper. Up (Right Reading) means that type in the image

is readable (that is, “right reading”) when the photosensitive layer is facing you. Down (Right Reading) means that type

is readable when the photosensitive layer is facing away from you. Normally, images printed on paper are printed Up

(Right Reading), whereas images printed on film are usually printed Down (Right Reading). Check with your print

shop to determine which emulsion direction it prefers.

To tell whether you are looking at the emulsion side or the nonemulsion side (also referred to as the base), examine

the final film under bright light. One side appears shinier than the other. The dull side is the emulsion side; the shiny

side is the base.

Image exposure refers to whether artwork prints as a positive or negative image. Typically, print shops require negative

film in the United States and positive film in Europe and Japan. If you are unsure about which image type to use,

consult your print shop.

Print an object on all plates

If you want to print an object on all plates in the printing process, including spot-color plates, you can convert it to a

registration color. Registration marks, trim marks, and page information are automatically assigned registration colors.

1 Select the object.

2 In the Swatches panel, click the Registration color swatch , located in the first row of swatches, by default.

To change the on-screen appearance of the registration color from the default black, use the Color panel. The color

you specify will be used for representing registration-colored objects on the screen. These objects will always print as

gray on composites and as an equal tint of all inks in separations.

Printer’s marks and bleed

About printer’s marks

When you prepare artwork for printing, a number of marks are needed for the printer device to register the artwork

elements precisely and verify correct color. You can add the following kinds of printer’s marks to your artwork:

Trim Marks Fine (hairline) horizontal and vertical rules that define where the page should be trimmed. Trim marks

can also help register (align) one color separation to another.

Registration Marks Small targets outside the page area for aligning the different separations in a color document.

Color Bars Small squares of color representing the CMYK inks and tints of gray (in 10% increments). Your service

provider uses these marks to adjust ink density on the printing press.

Page Information Labels the film with the name of the artboard number, the time and date of printout, the line screen

used, the screen angle for the separation, and the color of each particular plate. These labels appear at the tops of the

images.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adobe ILLUSTRATOR CS4 Seite 419

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Adobe ILLUSTRATOR CS4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info