Bedienungsanleitung AEG BSS 4815 (Seite 36 von 66) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

546333

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

English

13 TREBLE+/TREBLE- buttons (adjust trebles)

BASS+/BASS buttons (adjust basses)

14 button (On/Operational readiness)

Wall mounting

A Threadedbolt(2x)

B Mountingplate(2x)

C Countersunkscrew(4x)

D Dowel(4x)

First Use of the Device/Introduction

• Selectaproperplaceforthedevice.Adry,levelandslip

proof surface is suitable.

• Makesurethedeviceisventedsufciently!

• Removetheprotectivelmfromthedevice,ifpresent.

Wall mounting (Sound bar)

You can also mount the device to the wall.

CAUTION:

Make sure beforehand whether there are cables in the wall

which could be damaged!

NOTE: Check the reach of the cable!

To mount the device, make sure that an easily accessible

plug outlet is available within reach of the power cable.

The distance between the mountings for wall mounting is

618 mm.

• Holdthemountingplate(B)tothewallsothattheabove-

listed distance is kept horizontally and from the center of

the mounting plates.

• Markthefourpositionsofthemountingholeswithapen-

cil.

• Drillthemountingholes(diameter6mm).

• Stickthedowels(D)intotheboreholesandfastenthe

mounting plates to the wall with the countersunk screws

(C).

• Twistthethreadedbolts(A)intothebacksideofthe

sound bar so far that there is enough space between the

wall and the connection cable.

CAUTION: IMPORTANT!

For an optimal wall mounting we recommend the use

of connection cables with an angled connection. You

can obtain corresponding cables from the specialist

shop.

• Hangthedeviceintothemountingplates(B)withthe

screws (A). Check for stable support.

Establish a power supply and wireless subwoofer connec-

tion.

The wireless connection of the subwoofer is created automa-

tically.

• Setupthesubwooferinaradiusof5meterstothesound

bar.

• Makesurethegridvoltagecorrespondstothegureson

the rating plate.

• Plugthepowerplugofbothdevicesintoaproperly

installed protective wall socket.

• Now turnonthesubwooferbyswitchingthepowerswitch

on the back side of the device to the “ON” position.

The connection is established as soon as you turn on the

sound bar with the button (14).

NOTE:

The lithium cell in the battery compartment of the remote

control was possibly secured with a foil for the transport.

This prolongs the lifetime of the battery. Please remove this

foil before the ﬁrst use to make the remote control ready

for operation.

• Openthebatterycompartmentontheundersideofthe

remote.

• Replacethecellwithabatteryofthesametype(CR

2025). Check that the polarity is correct (see battery com-

partment).

• Closethebatterycompartment.

If the remote is not in use for a lengthy period of time, please

remove the battery to prevent the battery acid from “leaking”.

WARNING:

• Donotexposethebatteriestointenseheat,suchas

sunlight, ﬁre or similar. Danger of explosion!

• Keepbatteriesoutofthereachofchildren.Theyare

not toys.

• Donotforcebatteriesopen.

• Avoidcontactwithmetallicobjects.(Rings,nails,screws

etc.) Danger of short circuits!

• Shortcircuitsmayoverheatorevenignitebatteries.

This may lead to combustion.

• Whentransportingthebatteries,covertheterminalsfor

your safety with an adhesive strip.

• Ifabatteryleaks,donotrubtheuidintotheeyesor

the skin. If acid comes into contact with the eyes, rinse

with puriﬁed water and seek medical advice if symp-

toms persist.

NOTE:

• Oncetheconnectionisestablished,thecontrollight

of the subwoofer will light up. If no connection was

established,theLEDwillash. If no connection is made

within about 5 Minutes the LED goes out.

• Disconnectfrommainspowersupplyduringlonger



periods of non-use.

Insert/Replace Battery in Remote Control

• Turnonthesoundbarbyswitchingthepowerswitch

(5) on the backside of the device to the “ON” position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG BSS 4815 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info