Bedienungsanleitung AEG BSS 4815 (Seite 37 von 66) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

546333

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

English

CAUTION:

Batteries must not be disposed of in the garbage. Please

bring used batteries to competent collection centers or

back to the dealer.

Reestablishing factory settings

Possible malfunctions during the operation may be remedied

by pressing the RESET button (2).

• Presstheresetbutton(RESET)ontheremotecontrolto

reset the electronics. The settings made by you will get

lost in the process.

General Operation

Switch device on/off

• Turnonthedeviceswiththepowerswitchontherear.Set

the POWER switch to the “ON” position.

• Withthe

button (14), you can switch the unit between

standby and operating mode. When in standby, two bars

are lit in the display.

• Toturnoffthedevices,setthepowerswitchPOWERon

the back side to the “OFF” position. To disconnect the

unit completely from the mains, pull the mains plug from

the socket.

NOTE:

After about 30 minutes without signal, or if the signal is too

weak, the device will automatically switch to standby.

Volume

By pressing the

/ buttons (7/10) you can adjust the desi-

red volume.

Infrared Remote Control

For wireless control within a distance of 5 m. If this range de-

creases, the battery has to be replaced. For proper operation

mind a clear view between the remote control and the sensor

on the device.

INPUT (1)

Press the INPUT button until the desired operating mode is

shown on the display. After 3 seconds the volume indicator

appear in the display again.

Sound Settings (4)

(Preset equalizer function) Different ssound modes are availab-

le (NORMAL, MUSIC, MOVIE).

NOTE:

If necessary, change the EQ setting in your playback unit to

create the best sound.

Adjusting basses and trebles (13)

The basses are adjusted with the BASS+/BASS- buttons.

The trebles are adjusted with the TREBLE+/TREBLE- buttons.

(3)

For immediate muting of the volume. The currently set

volumewillashinthedisplay.Press

again to cancel the

function.

Radio mode

1. Fully uncoil the wire antenna. Insert the dipole antenna

into the FM jack (1).

2. Manual scan for radio stations:

 Brieypressthe>>/<< button (6), until you have found

the radio station which you are looking for. If you keep

one of the buttons pressed down, the device will search

totheprevious,respectivelynextradiostation.

Preset station:

1. Using the CH+ or the CH- button, select the program

channel space before the program channel in which

you want to store a radio station. Example: To store

a station in the program channel CH02, set the pro-

gram channel CH01.

2. Search for the desired radio station with the >>/<<

buttons (6).

3. To store the radio station, keep the CH+ button

(11) pressed down for ca. 3 seconds. For the listed

example,CH02willappearbrieyinthedisplayand

the radio station is stored.

3. If the reception is too weak and there is interference on

the received station, try to improve the reception by

altering the position and uncoiling or coiling the antenna.

For FM stations, you can use the ST/MONO button (8) to

switch between mono and stereo reception. We recom-

mend that you switch to mono in case of bad reception.

The message “ST” is shown on the display for stereo

reception. During reception in mono “SOFF” will appear

brieyinthedisplay.

Select the preset radio station

The preset radio stations can be selected by repeatedly

pressing the CH+/CH- button (11).

Playing back music ﬁles

You have two possibilities to replay own music ﬁles with the

device: Wired or wireless via Bluetooth.

By cable (Cable not included)

The device has three connection possibilities: COAXIAL (2),

PC (3), and OPTICAL (4).

1. If required, use a suitable adapter (not included).

 Connecttheexternaldeviceasfollows:

• Withacinchcable(RCA)totheCOAXIALjack(2).

• Witha3.5mmstereojackplugtothePCsocket(3).

• WithaTOSLINKcabletotheOPTICALjack(4).

2. Depending on the connection used, press the INPUT

button (1) until COA, PC, or OP appears in the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG BSS 4815 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info