Bedienungsanleitung AEG CDP 4200 (Seite 25 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

546485

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ENGLISH

General safety instructions

To avoid the risk of ﬁ re or an electric shock, you should

not expose the device to rain or moisture. Consequently,

do not use the device in the immediate vicinity of water

- for example near a bath tub, a swimming pool or in a

damp cellar.

Use the device only for the intended purpose.

Only connect the device at a properly installed plug

socket. Pay attention that the speciﬁ ed voltage corres-

ponds to the voltage of the plug socket.

When using external mains supply, pay attention to the

correct polarity and voltage. Always place the batteries

in the correct direction.

Assemble the device in such a way that the available

ventilation openings are not covered.

Never open the housing of the device. Incorrect repairs

can constitute a considerable risk for the user. Should

the device become damaged, in particular the mains

supply cable, do not operate the device any longer, but

rather have it repaired by an expert. Check the mains

supply cable regularly for damage.

For safety reasons a broken or damaged mains lead may

only be replaced by an equivalent lead from the manuf-

acturer, our customer service department or a similary

qualiﬁ ed person.

If the device is not used for a longer period, remove the

plug connector from the plug socket or take out the

batteries.

These symbols may be found on the machine and are

intended to indicate the following:

The lightning symbol should advise the user

of parts in the inside of the device which carry

dangerously high voltage levels.

The symbol with an exclamation mark should

advise the user of important operation or

maintenance instructions in the accompa-

nying documentation.

Devices bearing this symbol work with a

„class 1 laser“ for tracing the CD. The built-in

safety switches should prevent the user being

exposed to dangerous laser light, which is

invisible to the human eye, when the CD compartment

is opened.

Under no circumstances should these safety switches

be bypassed or manipulated, as this could result in a

danger of exposure to the laser light.

Commissioning the device

Battery Mode (not supplied)

• Open the battery compartment on the inside of the

machine

• Insert 2 1.5V AA type batteries. Match the polarities

correctly (see the inside of the battery compartment).

• If the device is not used for a long period of time, remo-

ve the batteries to avoid the „spilling“ of battery acid.

• A battery symbol in the display indicates that the bat-

teries need changing. Always change the complete

set of batteries, do not replace only one battery.

Warning: batteries are not to be disposed of together

with domestic wastes. Dispose of the used batteries at

the relevant collection bin or at your dealer’s.

Never throw batteries into the ﬁ re.

AC Adapter Mode (not supplied)

You can also use the device with an adapter.

1. Insert the AC adapter into a duly installed 230V/50Hz

protective contact outlet.

2. Connect the CD player to the AC adapter by connec-

ting the jack of the adapter into the 4.5V/DC socket.

3. When using an adapter match the polarities correctly

as indicated on the CD player.

General Operating

LINE-OUT: for connection to a stereo sys-

tem, for example.

PHONES: for connecting head- or earpho-

nes.

VOLUME: is used to set the volume of the

music.

OPEN: For opening the CD compart-

ment.

4,5 V socket: for connecting a mains adapter.

HOLD: it blocks the functions of all the

device’s keys to protect against

their accidental activation. If the

switch is pushed to the right,

the word „HOLD“ appears in the

display.

CHARGE ON/OFF: This switch is located on the

bottom of the device. The char-

ging function is activated when

connected to an external mains

line.

Make sure that there are no

batteries in the battery compart-

ment. Danger of explosion! Use

only appropriate rechargeable

batteries!

Note: In order to create the con-

tact to the battery, please use the

charging socket supplied.

Switching off

The machine is switched off by pressing the STOP

button once, or twice if one of the devices is still running.

It will also switch off automatically if not operated for

approx. 30 seconds.

5....-05-CDP 4200 AEG 25 13.04.2004, 11:09:47 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG CDP 4200 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info