Bedienungsanleitung AEG CDP 4200 (Seite 26 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

546485

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ENGLISH

Playing CDs

1. Shift the OPEN key to the right to open the CD com-

partment.

2. Insert a CD with the label facing upwards and press

carefully over the button until it snaps into place.

Close the CD compartment.

3. Press the PLAY/PAUSE button to switch the device

on and play back the CD. „--“ appears in the display,

i.e. number of tracks and the total running time. The

CD starts from the ﬁ rst track. The track currently

being played and the time that has elapsed are

shown in the display.

4. To remove a CD, press the STOP key, open the CD

deck with the OPEN key and take out the CD carefully.

Please note these instructions for playing back CDs

and CDRs in MP3 format! The device is not able to

play back MP3 ﬁ les. The CD begins to turn, but the

sound cannot be heard.

Always keep the CD deck cover closed.

Note: If a disc is inserted incorrectly, or no disc is inser-

ted, the symbol „DISC“ appears in the display.

Description of the CD buttons:

PLAY/PAUSE ̈ / II: You can brieﬂ y interrupt the

playing. Renewed pressing of the

button will re-start the playing

from the same place.

STOP ˾: The CD is stopped. By pressing

once again, the unit is switched

off.

BBS (BASS BOOST): increases the bass sound. Press

repeatedly to switch between

BOOST 1 and BOOST 2.

PROG: See under “Programmed Play”.

MODE: The following functions can be

selected with the MODE key:

Press once =

„

1“: the current track is

repeated continuously.

Press a second time =

„

ALL“: the whole CD is

played continuously.

Press a third time =

Then press the PLAY/PAUSE

button. „INTRO“: All tracks are

played for ten seconds. The word

„INTRO“ appears in the display.

Press a fourth time =

The word „SHUFF“ appears in

the display (during playback).

If the PLAY/PAUSE button is

pressed, all tracks are played

back in random order.

Press a ﬁ fth time =

all the functions are reset.

The normal play mode is resu-

med.

ESP (Anti-Shock): It ﬁ lls the 45-second electronic

memory to protect against the

jumping of the CD. When anti-

shock is activated a bar appears

in the display which slowly ﬁ lls

up. Press the button again to

deactivate this function.

İ̇ SKIP -: Press once =

This starts the current track again

from the beginning.

Press a second time =

This jumps back to the previous

track.

Press a third time =

This plays the song before etc. If

the button is kept pressed down,

the machine starts to search

through the tracks (The sound is

muted).

̈̈I SKIP +: With this button you can jump

to the following track or the next

track but one etc. If the button is

kept pressed down, the machine

starts to search through the

tracks.

Programmed Play

1. Press the PROG key.

2. PROG and „00“ (track number) ﬂ ashes on the

display. The memory slot number can be seen on the

right.

3. Use the İ̇ / ̈̈I SKIP buttons to select the desi-

red track and then press the PROG button again.

4. The display changes to memory slot 02.

5. Repeat the procedure until all the desired tracks are

selected. If the SKIP -/+ buttons are pressed, the

order in which the tracks are stored is displayed.

6. Press the PLAY/PAUSE key. The playback starts.

Press this button to pause brieﬂ y the playback.

7. Press once the STOP key to stop the playback while

retaining the program.

8. To resume the playback of the program press ﬁ rst the

PROG key once and then the PLAY/PAUSE key.

9. To delete the program, press the STOP key twice

(The machine switches off) .

The device stops automatically once the entire sequence

of programmed tracks is completed. The programmed

sequence remains in the memory until the CD is taken

out of the CD deck or until the device is switched off.

It is possible to combine the pre-programmed tracks

with the MODE function. After you have programmed the

tracks and started the machine, please press the MODE

button up to fourth times so that the functions „

1“, „

ALL“ and „INTRO“ can be used as described in the

section entitled „MODE“.

This device has been tested according to all relevant cur-

rent CE guidelines, such as electromagnetic compatibili-

ty and low voltage directives, and has been constructed

in accordance with the latest safety regulations.

Subject to technical changes without prior notice!

5....-05-CDP 4200 AEG 26 13.04.2004, 11:09:48 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG CDP 4200 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info