474117
62
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
62
ENGLISH
9.1 PVR Settings
1. Press the TV MENU button to display the OSD main menu.
2. In the main menu select OPTION, press
to select PVR File System and press OK.
Select Disk
Not applicable for this device.
Check PVR File System
Check the connected USB device. Press OK to check the PVR le system.
NOTE:
Depending on the USB media’s storage capacity, the check can take a little while. Do not press any buttons during
the check.
USB Disk
Here the le system check status is displayed.
Format
Press OK to format the disk.
CAUTION Existing les are deleted!
Connected PVR media must be formatted! The device writes specic les to the disk.
The window on the right is displayed. Select between “FAT 32” and “Hi Speed” for-
matting.
Press
/ to select the desired formatting mode.
Press OK to conrm. A security prompt is displayed.
Press to start formatting. The USB device is now formatted and the PVR les
are created.
NOTE: This can take several minutes according to disk capacity.
If you have selected “Hi Speed” formatting, a window for setting the time shift size appears.
Press
/ to select the desired Time Shift Size (size between 512MB….All).
NOTE:
Selecting ALL for the time shift function uses the maximum disk capacity, and for further recordings is no capacity
left.
• FreeRecordLimit
Press the arrow button
to select the recording time between 1 and 6 hours.
9.2 Direct PVR Recording (Manual)
1. In DTV mode select the programme to be recorded.
2. Press the REC/REP button. The info bar is displayed.
The recording time is displayed at the bottom right. Below this you can see the remaining recording time in blue.
The info bar at the bottom on the left displays the channel number together with the name of the station.
NOTE:
Press REC/REP again to hide the info bar. The REC button remains top left on screen.
3. Press the
button to nish recording.
NOTE:
Press the
button to pause the current recording ( see “9.5 Time Shift Function” on page 63).
Record a programme and watch another at the same time
During PVR recording you can switch to another programme of the same channel. In doing so, you will not interrupt the
recording.
62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

aeg-ctv-2404-led-dvb-t

Suche zurücksetzen

  • kann ich den fernseher auch ohne fernbedienung bedinen
    Eingereicht am 24-5-2020 15:01

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AEG CTV 2404 LED-DVB-T wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info