Bedienungsanleitung Aeg-electrolux cf 260 (Seite 35 von 100) (Deutsch, Englisch, Holländisch, Portugiesisch, Spanisch)

361847

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Caution! Danger of burns from the

frothing aid! Hold the frothing aid only

by the black seal.

6 Preparing Hot Water

The hot water can be used to pre-heat

cups and for making hot drinks, e.g. tea

or instant soups.

Caution! Danger of scalding when the

hot water nozzle is activated! Hot

water or steam output can cause

scalding. Activate the hot water nozzle

only when a container is under the hot

water nozzle.

0 Place a container under the hot water

nozzle. Set the Selection dial for steam

and hot water (Fig. 1, D) to the

position (Fig. 19). Hot water is now

prepared.

0 After you have dispensed the hot water

turn the Selection dial for steam and

hot water (Fig. 1, D) back to the

position (Fig. 19) and remove the con-

tainer.

7 Changing and Saving the

Cup Measure

The coffee machine is factory-set to

standard measures. These measures can

be individually changed to your own

taste and saved for each cup size.

0 Repeatedly press the "Cup Measure"

key (Fig. 3, d) until the cup symbol, for

which you wish to change the measure,

is illuminated.

0 Place the appropriate cup under the

coffee dispenser (e.g. coffee mug).

0 Press and hold the Key for 1 cup of

coffee (Fig. 3, b) until the cup/mug

is filled to the desired measure. Release

the key. Your new cup measure is now

saved.

0 Repeat the process if you would like to

change the measures for the other cup

symbols.

The saved measures remain stored

when the coffee machine is switched

off. If your coffee cups or your taste

change, you can easily change the cup

measure(s) to your new requirements,

whenever you want.

8 Changing and Saving the

Coffee Quantity

You can set and save a different coffee

quantity for each cup symbol to your

individual requirements. This can be

done only for use with coffee beans,

not for use with ground coffee.

0 Repeatedly press the "Cup Measure"

key (Fig. 3, d) until the desired cup

symbol is indicated.

0 Then repeatedly press the "Coffee

Quantity" key (Fig. 3, c) until the

desired coffee quantity indicator is

illuminated, and hold the key pressed

(Fig. 20).

After the key has been held for a few

seconds, all the indicators are con-

stantly on – except for the one

selected (Fig. 21). Now release the key.

The coffee quantity is now saved.

0 Repeat the process if you would like to

save coffee quantities for the remain-

ing cup symbols.

The saved quantities remain stored

when the coffee machine is switched

off.

9 Setting the Grinding

Texture

Note! The grinder settings must be

changed only while coffee is being

ground. Making adjustments to the

stationary grinder can damage the cof-

fee machine.

0 Press the Key for 1 cup of coffee (Fig.

3, b) to make one cup of coffee.

While the coffee is being ground, use

the Lever for setting grinding texture

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aeg-electrolux cf 260 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info