386967

AEG sbe 630 rx Seite 18

18
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
19
BE 600 R BE 600 RX BE 630 R SBE 630 R SBE 630 RX
Supertorque Supertorque
..... 600 W............ 600 W ............630 W............. 630 W............ 630 W
..... 300 W............ 300 W ............315 W............. 315 W............ 315 W
0-2700 /min ... 0-2700 /min......0-950 /min.......0-950 /min ... 0-2900 /min
... 1500 /min ...... 1500 /min.........520 /min.......... 520 /min ...... 1500 /min
..........- .................... - .....................- ............40000 /min .... 43500 /min
..........- .................... - .....................- ............22500 /min .... 25500 /min
..........- .................... - .....................- ..................16 mm ........... 15 mm
..........- .................... - .....................- ..................20 mm ........... 18 mm
....... 10 mm ........... 10 mm............13 mm ............13 mm ........... 13 mm
....... 13 mm ........... 13 mm............16 mm ............16 mm ........... 13 mm
....... 30 mm ........... 30 mm............40 mm ............40 mm ........... 30 mm
.1,0-10 mm..... 1,0-10 mm......1,5-13 mm ......1,5-13 mm ..... 1,5-13 mm
1/2"x20 ......... 1/2"x20 ..........1/2"x20 .......... 1/2"x20 ......... 1/2"x20
....... 43 mm ........... 43 mm............43 mm ............43 mm ........... 43 mm
.... 1,35 kg .......... 1,35 kg.............1,5 kg.............. 1,5 kg .......... 1,35 kg
... < 2,5 m/s
2
...... < 2,5 m/s
2
.......< 2,5 m/s
2
...........18 m/s
2
.......... 18 m/s
2
.........83 dB (A) ..........83 dB (A) ..........83 dB (A).........100 dB (A)........ 100.dB (A)
.........96 dB (A) ..........96 dB (A) ..........96 dB (A).........113 dB (A)........ 113.dB (A)
ENGLISH
TECHNICAL DATA
Nominal power.......................................................................................
Rated output..........................................................................................
No-load speed .......................................................................................
Speed under load max. .........................................................................
percussion rate......................................................................................
Rate of percussion under load max.......................................................
Drilling capacity in concrete...................................................................
Drilling capacity in brick and tile ............................................................
Drilling capacity in steel.........................................................................
Drilling capacity in aluminium ................................................................
Drilling capacity in wood........................................................................
Drill opening range ................................................................................
Drive shank............................................................................................
Chuck neck diameter.............................................................................
Weight of the machine...........................................................................
Typical weighted acceleration in the hand-arm area .............................
Typical A-weighted sound levels:
Sound pressure level..........................................................................
Sound power level..............................................................................
Wear ear protectors!
Measured values determined according to EN 50 144.
SAFETY INSTRUCTIONS
Please pay attention to the safety instructions in the attached
leaet!
Appliances used at many different locations including open air
must be connected via a current surge preventing switch.
Always wear goggles when using the machine. It is
recommended to wear gloves, sturdy non slipping shoes and
apron.
Sawdust and splinters must not be removed while the
machine is running.
Always disconnect the plug from the socket before carrying
out any work on the machine.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine.
Always lead the cable away behind you.
Always use the auxiliary handle, even if the machine has a
safety clutch since this safety clutch only engages when the
machine blocks with a jerk.
Do not use diamond core drills on hammer mode.
When working in walls ceiling, or oor, take care to avoid
electric cables and gas or waterpipes.
SPECIFIED CONDITIONS OF USE
The electronic drill/screwdriver can be universally used for
drilling, percussion drilling, screwdriving and cutting screw
threads.
Do not use this product in any other way as stated for normal
use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in
conformity with the following standards or standardized
documents. EN 50144, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3, in accordance with the
regulations 98/37/EC, 73/23/EEC, 89/336/EEC
Manager Product Marketing and
Development
MAINS CONNECTION
Connect only to a single-phase AC current supply and only to
the mains voltage specied on the rating plate. Connection to
sockets without earth protection is possible as the appliance
features protective insulation to DIN 57 740/ VDE 0740 and
CEE 20. Radio suppression complies with the European
standard EN 55014.
MAINTENANCE
The ventilation slots of the machine must be kept clear at all
times.
If the machine is mainly used for percussion drilling, regularly
remove collected dust from the chuck. To remove the dust
hold the machine with the chuck facing down vertically, and
completely open and close the chuck. The collected dust will
fall from the chuck. It is recommended to regularly use cleaner
(Id.No. 4932 6217 19) for the clamping jaws and the clamping
jaw borings.
Use only AEG accessories and spare parts. Should
components need to be exchanged which have not been
described, please contact one of our AEG service agents (see
our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the ten-digit No. as well as the machine type
printed on the label and order the drawing at your local
service agents or directly at: Atlas Copco Electric Tools
GmbH, Postfach 320, D-71361 Winnenden.
SYMBOLS
Always disconnect the plug from the socket
before carrying out any work on the machine.
Accessory - Not included in standard
equipment, available as an accessory.
The data stated above apply for models with 230 - 240 V.
In case of deviating mains voltage, the data stated on the rating plate are applicable.
… 18 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AEG sbe 630 rx wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info