Bedienungsanleitung AEG TS 55 E (Seite 18 von 101) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

463236

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

English

WARNING!

Read all safety warnings and all instructions, including those

given in the accompanying brochure. Failure to follow the

warnings and instructions may result in electric shock, re and/or

serious injury. Save all warnings and instructions for future

reference.

SAFETY INSTRUCTIONS

Danger:

Keep hands away from cutting area and the blade. Keep your

second hand on auxiliary handle, or motor housing. If both

hands are holding the saw, they cannot be cut by the blade.

Do not reach underneath the workpiece. The guard cannot

protect you from the blade below the workpiece.

Adjust the cutting depth to the thickness of the workpiece.

Less than a full tooth of the blade teeth should be visible below the

workpiece.

Never hold piece being cut in your hands or across your leg.

Secure the workpiece to a stable platform. It is important to

support the work properly to minimize body exposure, blade binding,

or loss of control.

Hold power tool by insulated gripping surfaces when

performing an operation where the cutting accessory may

contact hidden wiring or its own cord. Cutting accessory

contacting a „live“ wire may make exposed metal parts of the power

tool „live“ and could give the operator an electric shock.

When ripping always use a rip fence or straight edge guide.

This improves the accuracy of cut and reduces the chance of blade

binding.

Always use blades with correct size and shape (diamond

versus round) of arbour holes. Blades that do not match the

mounting hardware of the saw will run eccentrically, causing loss of

control.

Never use damaged or incorrect blade washers or bolt. The

blade washers and bolt were specially designed for your saw, for

optimum performance and safety of operation.

Causes and operator prevention of kickback:

- kickback is a sudden reaction to a pinched, bound or misaligned saw

blade, causing an uncontrolled saw to lift up and out of the workpiece

toward the operator;

- when the blade is pinched or bound tightly by the kerf closing

down, the blade stalls and the motor reaction drives the unit rapidly

back toward the operator;

- if the blade becomes twisted or misaligned in the cut, the teeth at

the back edge of the blade can dig into the top surface of the wood

causing the blade to climb out of the kerf and jump back toward the

operator.

Kickback is the result of saw misuse and/or incorrect operating

procedures or conditions and can be avoided by taking proper

precautions as given below.

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in

EN 60 745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for dierent applications, with

dierent accessories or poorly maintained, the vibration emission may dier. This may signicantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running

but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and the accessories, keep

the hands warm, organisation of work patterns.

TECHNICAL DATA Circular Saw

TS 55 E

Rated input ........................................................1500 W

No-load speed ....................................................5500 min

-1

Saw blade dia. x hole dia . ............................160 x 20 mm

Cutting depth at 45° ...........................................39 mm

Cutting depth at 90° ...........................................55 mm

Weight without cable............................................5,4 kg

Noise/Vibration Information

Measured values determined according to EN 60 745.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K = 3 dB(A)) .............................93 dB (A)

Sound power level (K = 3 dB(A))...............................104 dB (A)

Wear ear protectors!

Total vibration values (vector sum in the three axes) determined

according to EN 60745.

Vibration emission value a

........................................4,7 m/s

Uncertainty K = .........................................................1,5 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG TS 55 E Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info