Bedienungsanleitung AEG TS 55 E (Seite 20 von 101) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

463236

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

English

SPECIFIED CONDITIONS OF USE

The plungecut circular saw can be used for sawing solid wood,

bonded wood, glued veneer, materials similar to wood, plaster and

cement-bonded bre materials, aluminium proles, Non-ferrous

metals and plastics.

Do not use this product in any other way as stated for normal use.

ECDECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is in

conformity with the following standards or standardized documents.

EN 60745, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3,

in accordance with the regulations 2006/42/EC, 2004/108/EC

Rainer Kumpf

Manager Product Development

Authorized to compile the technical le

Winnenden, 2010-10-25

MAINS CONNECTION

Connect only to single-phase AC current and only to the

system voltage indicated on the rating plate. It is also possible

to connect to sockets without an earthing contact as the design

conforms to safety class II.

MAINTENANCE

The ventilation slots of the machine must be kept clear at all times.

Clean only with dry cloth. Certain cleaning agents and solvents are

harmful to plastics and other insulated parts. Keep the apparatus

handle clean, dry and free of oil or grease.

Use only AEG accessories and spare parts. Should components need to

be replaced which have not been described, please contact one of our

AEG service agents (see our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered. Please state

the Article No. as well as the machine type printed on the label

and order the drawing at your local service agents or directly at:

AEG Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden,

Germany.

SYMBOLS

Please read the instructions carefully before starting

the machine.

CAUTION! WARNING! DANGER!

The dust produced when using this tool may be harmful

to health. Do not inhale the dust. Wear a suitable dust

protection mask.

Always wear goggles when using the machine.

Always disconnect the plug from the socket before

carrying out any work on the machine.

Accessory - Not included in standard equipment,

available as an accessory.

Solid wood (hard, soft), chipboards and hard bre

boards, laminated wood, blockboards, veneered and

coated boards

Plastics, bre-reinforced plastics paper and fabric acrylic

glass

Plaster and cement-bonded bre boards

Aluminium panels and proles up to 15 mm

Do not dispose of electric tools together with household

waste material! In observance of European Directive

2002/96/EC on waste electrical and electronic

equipment and its implementation in accordance with

national law, electric tools that have reached the end of

their life must be collected separately and returned to

an environmentally compatible recycling facility.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG TS 55 E Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info