Bedienungsanleitung AEG vcr 4500 (Seite 76 von 80) (Deutsch)

135583

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

12 EN

same time on the same channel every week. While the

month digit is flashing, press

PLAY/o or STOP/L

repeatedly to select “W-MO” (Example: every monday).

5) For once-only recording only : Press PLAY/o or STOP/L

repeatedly until your desired day appears.

6) Press

PLAY/o or STOP/L repeatedly until the relevant

start hour appears. Next, enter the minute digit.

7) Press PLAY/o or STOP/L repeatedly until the relevant

end hour appears. Next, enter the minute digit.

8) Press PLAY/o or STOP/L repeatedly until the relevant

channel number appears.

9) Press

PLAY/o or STOP/L repeatedly until the desired

tape speed appears.

10)Press F.FWD /B. Programme 1 is now completed.

•To set another timer programme, repeat steps

3) to 10).

11)Press

MENU to exit.

12)Press

FUNCTION to activate the timer.

The

w indicator on the display comes on.

To Stop a Timer Programme which has Already

Started

Press STOP/EJECT on the VCR.

Note: STOP/L on the remote control will not function in the

Timer Recording mode.

To Correct Timer Programmes

If you want to correct an automatic timer after you finished

setting programme,

1) Repeat steps 1) to 3) in the “Timer Recording” section.

2) Select the setting you want to change using

F.FWD/B or

REW/s.

3) Enter the correct numbers using

PLAY/o or STOP/L,

then press

F.FWD/B.

4) Press

MENU to exit.

5) Press

FUNCTION to return to timer standby mode.

To Cancel or Check the Start/End Time

1) Repeat steps 1) to 2) in the “Timer Recording”.

2) Select a programme number you want to check using

PLAY/o or STOP/L. The details of selected programme

appears on the TV screen. You may cancel the entire

programme by pressing

REW/s.

3) Press

MENU to exit.

Avoid Overlap of TIMER Programmes...

A timer programme does not work while another programme

is under execution.

Hint for Timer Recording

• If there is a power failure or if the VCR is unplugged for

more than 30 seconds, the clock setting and all timer

settings will be lost.

• If the tape runs out before the end time, the VCR will

switch to the Stop mode immediately, eject the tape and the

VCR power will be turned off. The w indicator will flash.

• If a tape is not in the VCR, timer recording cannot be

performed and the w indicator flashes. If an erase-

prevention tab of the tape is missing, the tape will be

ejected and the w indicator will flash. Please insert a

recordable tape.

• When all the Timer Recordings are completed, the w also

flashes. To play or eject the recorded tape, press

FUNCTION

first

, and then press PLAY/o or EJECT. To rewind the tape

to the beginning of the recorded programmes, press

AUTO RETURN on the VCR.

• The TV that is connected to your VCR may be turned on

or off when the VCR is in the Timer-recording mode.

• The VCR will only perform a timer recording after it has

been placed into timer standby mode.

Auto Return

Using the AUTO RETURN Button

When all the Timer Recordings are completed (the w

indicator flashes), press

AUTO RETURN on the VCR first. The

VCR will rewind to the beginning of the recorded

programme(s).

Note: If there are any remaining programmes, press

FUNCTION to turn on the VCR and then press

AUTO RETURN. In this case, if you press any other

button once and then press

AUTO RETURN, AUTO

RETURN will not be carried out.

Using the VCR Menu

If there are any remaining programmes including Daily,

Everyday, & Weekly, AUTO RETURN will not operate.

1) Press

MENU.

2) Press

PLAY/o or STOP/L repeatedly to point to “SET

UP”, then press

F.FWD/B.

3) Press

PLAY/o or STOP/L to point to “AUTO

RETURN”, then press

F.FWD/B.

[ON] will appear next to “AUTO RETURN”.

4) Press MENU.

Watch the Recorded Timer Programme

Press FUNCTION to turn on the VCR, then press PLAY/o.

Parents Lock

Parents Lock prevents use of the VCR by making the VCR

feature buttons on the VCR and the remote control

inoperative.

• The PWR indicator on the display comes on.

1) Press and hold down

FUNCTION on the remote control for

5 seconds until “PL” appears on the display. The Parents

Lock is activated.

When you want to cancel it, press and hold

FUNCTION on

the remote control again for 5 seconds.

When Parents Lock is activated:

• The time will appear on the display. “PL” will appear on

the display for two seconds every minute.

• You may insert a tape. However, the VCR power will

remain off.

• You may press EJECT to remove the tape (unless a timer

recording is programmed or has finished).

• Timer recording will take place as scheduled, even if

Parents Lock is activated. “P.L.” will appear steadily on the

TV screen during the timer recording.

TIMER

SET UP

INITIAL

TIMER NUMBER

START

END

DATE

CHANNEL

SPEED

--/--

--:--

9:00 10:00 11:00

Programme 1

Programme 2

Programme 3

HG462ED(EN).fm Page 12 Wednesday, March 3, 2004 7:49 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG vcr 4500 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info